The intermetallic superconductor magnesium diboride (MgB 2 ) is a promising candidate for use in superconducting electronic devices because its high transition temperature (T c ). These applications require the development of a high-quality film fabrication process. We report the first ever attempt
Realization of non-polar ZnO (1 1 2̄ 0) homoepitaxial films with atomically smooth surface by molecular beam epitaxy
✍ Scribed by T.C. Zhang; Z.X. Mei; A.Yu. Kuznetsov; X.L. Du
- Publisher
- Elsevier Science
- Year
- 2011
- Tongue
- English
- Weight
- 577 KB
- Volume
- 325
- Category
- Article
- ISSN
- 0022-0248
No coin nor oath required. For personal study only.
✦ Synopsis
A route for realizing non-polar ZnO (1 1 2 ¯0) films with atomically smooth surface is demonstrated by employing rf-plasma assisted molecular beam epitaxy on ZnO bulk substrates. It is found that high growth temperature plays an important role in suppressing the typical striped structure along ZnO [0 0 0 1] direction on non-polar planes. An atomically smooth surface with a root mean square roughness of 0.51 nm that is suitable for fabrication of quantum wells is achieved after solving the growth anisotropy problem, as confirmed by the combined studies of reflection high-energy electron diffraction and atomic force microscopy.
📜 SIMILAR VOLUMES
Crystalline magnesium oxide (MgO) (1 1 1), 20 A ˚thick, was grown by molecular beam epitaxy (MBE) on hydrogen cleaned hexagonal silicon carbide (6H-SiC). The films were further heated to 740 8C and 650 8C under different oxygen environments in order to simulate processing conditions for subsequent f
ZnO nanowall networks were grown on a Si (1 1 1) substrate by plasma-assisted molecular beam epitaxy (P-MBE) without using catalysts. Scanning electronic microscopy (FE-SEM) confirmed the formation of nanowalls with a thickness of about 10-20 nm. X-ray diffraction (XRD) showed that the ZnO nanowall