𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Printed inset sleeve monopole antennas for dual-band applications

✍ Scribed by J.-W. Baik; Y.-S. Kim


Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
469 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

In this study, the simple printed monopole antennas with dual‐band operation are presented. The proposed antennas without any additional metal strips are consisted of the ground shorted inset sleeve for both microstrip and coplanar waveguide type ones. The omnidirectional radiation patterns of two models at two designed frequencies are almost similar to those of a conventional monopole. These printed monopole antennas are very suitable to various dual‐band applications for modern communications. Details of the proposed design and experimental results are demonstrated in this article. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1995–1997, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23574


📜 SIMILAR VOLUMES


Printed uni-planar dual-band monopole an
✍ Chi-Yin Fang; Hong-Twu Chen; Kin-Lu Wong 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 149 KB 👁 1 views

## Abstract A printed dual‐band monopole antenna suitable for wireless local‐area network (WLAN) applications in the 2.4‐ and 5.2‐GHz bands is presented. The monopole antenna including the ground plane is printed on the same (front) surface of a narrow FR4 substrate (with no metallic portion in the

Triple-band dual rectangular ring printe
✍ Qiu-Yi Zhang; Qing-Xin Chu 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 396 KB 👁 1 views

## Abstract A novel coplanar waveguide‐fed triple‐band antenna with omni directional radiation patters in the azimuth plane is proposed. The proposed antenna consists of two closed rectangular rings monopole and an inverted‐T strip. It can provide three separate impedance bandwidths of 17.5%, range

A new printed G-shaped monopole antenna
✍ Chien-Yuan Pan; Chien-Hsiang Huang; Tzyy-Sheng Horng 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 100 KB 👁 1 views

## Abstract A novel dual‐band printed G‐shaped monopole antenna is proposed. The antenna provides two resonant paths of different lengths (forming into a G‐shaped profile) in order to achieve 2.4‐ and 5.2‐GHz dual‐band operation for WLAN applications. Reasonably large impedance‐matching bandwidth a

A dual-band strip-sleeve monopole antenn
✍ C. H. Cheng; W. J. Lv; Y. Chen; H. B. Zhu 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 158 KB 👁 1 views

## Abstract A dual‐band strip‐sleeve monopole antenna fed by a coplanar waveguide (CPW) is presented. The antenna is designed to operate at 900 and 1800 MHz in a vehicular telephone. It is printed on a dielectric substrate and may be integrated with a microwave circuit manufactured on the CPW. It h

An F-shaped printed monopole antenna for
✍ Jyoti Ranjan Panda; Rakhesh Singh Kshetrimayum 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 480 KB 👁 1 views

## Abstract A simple microstrip fed printed monopole antenna for the radio frequency identification (RFID) and wireless local area network (WLAN) is presented.The antenna has two different resonant current paths (forming an F‐shaped structure) that support two resonances at 2.44 and 5.18 GHz, which

Dual-band strip-sleeve monopole for hand
✍ M. Rahman; M. A. Stuchly; M. Okoniewski 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 177 KB 👁 1 views

A dual-frequency strip-slee¨e monopole antenna for mobile handheld units has been designed that operates in both frequency bands allocated for wireless communication. The bandwidth of the antenna is 19.3 and 11.2% for AMPS and PCS bands, respecti¨ely with VSWR F 2. These bandwidths are practically u