## Abstract Optical millimeter‐wave (mm‐wave) generation based on an external modulator is proposed and simulately demonstrated.Both theoretical analysis and simulation results reveal that doubling‐frequency, quadrupling‐frequency, sextupling‐frequency, octupling‐frequency, decupling‐frequency, 12‐
Optically tunable millimeter-wave attenuator based on layered structures
✍ Scribed by Sangil Lee; Yasuo Kuga; Ruth Ann Mullen
- Publisher
- John Wiley and Sons
- Year
- 2000
- Tongue
- English
- Weight
- 185 KB
- Volume
- 27
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
been observed in the spatial region near s 0. This improvement is thought to be mainly due to the introduction of G ci1 which can provide compensation for the contribution beyond T , which has not been taken into account in the previous 0 method. Since the G corresponds to the complex images ci1 for
## Abstract A novel system configuration for optical generation of microwave/millimeter‐wave (mm‐wave), which is realized through Brillouin‐Erbium fiber laser (BEFL), is investigated.The microwave/mm‐wave is generated by the mixing of the __n__th‐order Stokes wave and the pump wave on the high‐spee
## Abstract We proposed and experimentally demonstrate a bidirectional orthogonal frequency‐division multiplexing‐radio‐over‐fiber (OFDM‐ROF) system by using an optical phase modulator and a fiber Bragger gating (FBG) to generate millimeter‐wave.The downstream date is 2.5‐Gb/s OFDM signals and the
## Abstract RF properties and avalanche noise generation in opto‐sensitive GaAs, InP, GaInAs, and GaInAsP double‐drift IMPATT diodes with and without optical injection have been studied. The optimum frequency and RF characteristics undergo sufficient variation with increase of intensity of optical
Figure 5 Measured gain versus frequency width when compared with the bandwidth of other singlepoint feed single-layer CP antennas. In this design, the horizontal portion of the L-shaped probe forms a transmission line with the ground plane. Owing to the cancellation between the inductance existing o