𝔖 Bobbio Scriptorium
✦   LIBER   ✦

On the morphology of -textured silicon crystallites in Al—Si eutectic alloys

✍ Scribed by Dipl.-Phys. J. Vetter; Dr.-Ing. J. Frühauf


Publisher
John Wiley and Sons
Year
1984
Tongue
English
Weight
130 KB
Volume
19
Category
Article
ISSN
0232-1300

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


The effect of iron on the precipitation
✍ Dr. U. Schmidt; M. Joachimi; L. Petzold; Dr. F. Eichhorn 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 523 KB

The effect of iron on the precipitation of a technical Al-Mg-Si alloy was studied by macroand microhardness, Y-modulus and SANS with D K D and was coinpared with a pure alloy. The iron phases of the technical alloy were preferentially considered by the SANS. I n addition the daniping by the elastoma

The effect of strain on the ageing time
✍ P.G. McCormick 📂 Article 📅 1974 🏛 Elsevier Science ⚖ 542 KB

The effect of discontinuous increases in strain rate on the yield behavior of specimens undergoing type A serrated yielding has been investigated. Above a critical increase in strain rate, a transition in the subsequent yield behavior, from further type A yielding to continuous yielding was observed

The effect of precipitation hardening on
✍ D.M. Riley; P.G. McCormick 📂 Article 📅 1977 🏛 Elsevier Science ⚖ 751 KB

The influence of precipitation hardening on the characteristics of serrated yielding in an Al-IMg-Si alloy has been investigated. The critical strain at the onset of serrated yielding was increased by ageing and for ageing times longer than 6 hr at 180°C serrated yielding was not observed. The strai

Morphological studies on machined implan
✍ Anders Palmquist; Fredrik Lindberg; Lena Emanuelsson; Rickard Brånemark; Håkan E 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 538 KB

## Abstract The aim of this study was to evaluate the bone response to commercially pure titanium grade I and titanium alloy grade V (90% Ti, 6% Al, and 4% V, depicted Ti6Al4V) after 8 weeks in rabbit tibia. Interference microscopy and scanning electron microscopy were used for surface analyses. Tr