✦ LIBER ✦

Dissolution of Si in Al–Si Melts. Effect of Sb on the Crystallization Process and As-cast Structure of Al–Si Alloys

✍ Scribed by S. B. Yaneva; N. V. Stoichev; A. D. Panajotova

Publisher: John Wiley and Sons
Year: 1981
Tongue: English
Weight: 349 KB
Volume: 16
Category: Article
ISSN: 0232-1300
DOI: 10.1002/crat.2170160623

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

On the Crystallization Process of Hypoeu

On the Crystallization Process of Hypoeutectic Al-6 % Cu,Unmodified and Sr-Modified Al-2 % Si Solidification Alloys

✍ J. Fjellstedt; H. Fredriksson 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 350 KB

Influence of Tin on the Structure and Pr

Influence of Tin on the Structure and Properties of As-Cast Ti-Rich Ti—Si Alloys.

✍ M. Bulanova; L. Tretyachenko; K. Meleshevich; V. Saltykov; V. Vereshchaka; O. Ga 📂 Article 📅 2003 🏛 John Wiley and Sons ⚖ 85 KB 👁 1 views

On the morphology of -textured silicon c

On the morphology of -textured silicon crystallites in Al—Si eutectic alloys

✍ Dipl.-Phys. J. Vetter; Dr.-Ing. J. Frühauf 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 130 KB 👁 1 views

Effect of Superimposed Low Frequency Osc

Effect of Superimposed Low Frequency Oscillations on the Static Creep Behaviour of Al–1 wt% Si and Al–1 wt% Si–0.1 wt% Zr–0.1 wt% Ti Alloys

✍ Beshai, M. H. N. ;Deaf, G. H. ;Abd El Khalek, A. M. ;Graiss, G. ;Kenawy, M. A. 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 382 KB 👁 2 views

The effect of Si/Al ratio of ZSM-5 zeoli

The effect of Si/Al ratio of ZSM-5 zeolite on its morphology, acidity and crystal size

✍ L. Shirazi; E. Jamshidi; M. R. Ghasemi 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 362 KB 👁 1 views

Stabilization Effect of Zr and Ti Additi

Stabilization Effect of Zr and Ti Additions on the Ageing Characteristics of Al-1 wt% Si Alloy Through a Creep Study

✍ Dr. G. H. Deaf; M. H. N. Beshai; A. M. Abd El Khalek; Prof. Dr. G. Graiss; Prof. 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 446 KB 👁 1 views

Si-0.1 wt% Zr-0.1 wt% Ti alloys were used to trace the effect of Zr and Ti additions on the behaviour of the steady state creep. After solid solution treatment specimens of both alloys were aged at 623, 673, 723 and 773 K and creep tests were performed at room temperature by applying stresses of 60.