Multijunction concentrator solar cells
โ Scribed by J.G. Werthen
- Publisher
- Elsevier Science
- Year
- 1987
- Weight
- 54 KB
- Volume
- 21
- Category
- Article
- ISSN
- 0379-6787
No coin nor oath required. For personal study only.
โฆ Synopsis
Multijunction concentrator AIGaAs and GaInAs subcells have been fabricated using metal-organic chemical vapor deposition. Under 400 Suns air mass 1.5, conversion efficiencies as high as 18% have been measured for A1GaAs (1.75 eV) cells grown lattice matched to GaAs. Under similar illumination conditions, GaInAs (1.15 eV) cells, which are grown lattice mismatched to GaAs, have shown conversion efficiencies of 24%. In a stacked multijunction structure the GaInAs cell is expected to provide 12% yielding a potential overall conversion efficiency of 30%. Details of subcell fabrication and testing will be described, along with a discussion about electrical interconnections in multijunction structures.
๐ SIMILAR VOLUMES
ture. GaInP2 with good phototuminescence characteristics has been grown by metalorganic chemical vapor deposition using trimethylindium, trimethylgallium and phosphine, Shallow homojunctions in GaInP2, heterotunnel junctions between GaInP2 and GaAs, and full GaInP2/GaAs cascade devices have also bee
An Al0.3Gao 7As/GaAs tandem solar cell was fabricated in a commercial reactor which has been specially modified for dual operation of both atomic layer epitaxy (ALE) and metalorganic chemical vapor deposition (MOCVD) growth modes. The p-type and n-type dopants were carbon and silicon, respectively,
Atomic layer epitaxy (ALE) was used to grow several components of the cascade solar cell structure in the AIGaAs/GaAs system. An ALE reactor was constructed for multiwafer growth with a growth rate of 0.6 p~m h -~. Device quality GaAs and AlxGal\_xAs films were grown with p-type background carbon do