✦ LIBER ✦

Metal droplet beams in M.E. technology: Production, focusing and deposition

✍ Scribed by Gérard Ben Assayag; Pierre Sudraud; Fathia Alaoui; L.W. Swanson

Publisher: Elsevier Science
Year: 1987
Tongue: English
Weight: 268 KB
Volume: 6
Category: Article
ISSN: 0167-9317
DOI: 10.1016/0167-9317(87)90059-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Implementation of tungsten metallization

Implementation of tungsten metallization in multilevel interconnection technologies : Paul E. Riley, Thomas E. Clark, Edward F. Gleason and Marion M. Garver. IEEE Trans. Semicond. Mfg3(4), 150 (1990)

📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 127 KB

Technology and applications of broad-bea

Technology and applications of broad-beam ion sources used in sputtering. Part II. Applications: J M E Harper et al, J Vac Sci Technol, 21 (3), 1982, 737–756

📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 151 KB

Effect of particulate type on fatigue cr

Effect of particulate type on fatigue crack propagation in AlLi based spray deposited metal matrix composites: Gupta, M., Bowo, K., Lavernia, E.J. and Earthman, J.C. Scr Metall Mater (1 May 1993) 28 (9), 1053–1058

📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 147 KB

0.15 μm T-gate E-beam lithography using

0.15 μm T-gate E-beam lithography using crosslinked P(MMA/MMA) developed in ortho-xylene resulting in high contrast and high plasma stability for dry etched recess gate pseudomorphic MODFETs for MMIC production

✍ A. Hülsmann; E. Mühlfriedel; B. Raynor; K. Glorer; W. Bronner; K. Köhler; Jo. Sc 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 418 KB

Accelerated-ion beam doping during Si gr

Accelerated-ion beam doping during Si growth by molecular beam epitaxy and ion-enhanced In film deposition using a low-energy (40–300 eV) In ion source: M-A Hasan J Knall SA Barnett, Department of Physics, Linköping University, S-58183 Linköping, Sweden and J-E Sundgren, A Rockett and JE Greene, Department of Mettalurgy, the Coordinated Science Laboratory and the Materials Research Laboratory, University of Illinois, Urbana, Illinois 61801, USA

📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 149 KB

Manual versus robotic assembly: Some imp

Manual versus robotic assembly: Some implications of product design : Domas, K., and Helander, M. In: Proceedings of the Human Factors Society 28th Annual Meeting ‘New Frontiers for Science and Technology’, San Antonio, Texas, 22–26 October 1984, Edited by M.J. Alluisi, S. De Groot and E.A. Alluisi. The Human Factors Society, Santa Monica, California, 1984, Vol 2, pp 659–663

📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 248 KB

total of 10 installations exhibiting a wide range of characteristics were evaluated by different types of office workers, performing typical tasks in a simulated four-person office. The participants' evaluations were recorded by questionnaire and the results are discussed. The general conclusion is