✦ LIBER ✦

Materials and design consideration for a compact artificial kidney

✍ Scribed by Levine, Sumner N. ;LaCourse, William C.

Publisher: John Wiley and Sons
Year: 1967
Tongue: English
Weight: 844 KB
Volume: 1
Category: Article
ISSN: 0021-9304
DOI: 10.1002/jbm.820010208

No coin nor oath required. For personal study only.

✦ Synopsis

A design theory is developed for a compact artificial kidney utilizing microcapsules containing urease, ion exchange resin, and adsorbents for uric acid and creatinine. It is shown that the critical factor is the permeability property of the microcapsule wall and that an artificial kidney 10 cm in length and 2 cm in diameter is feasible.

📜 SIMILAR VOLUMES

Material requirements and design conside

Material requirements and design considerations for Si/SiGe heterojunction CMOS

✍ S. Badcock; A. O’Neill 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 135 KB

Five vertical architecture options for SiGe/Si heterojunction CMOS devices are compared using technology computer-aided design. The benefit of using SiGe over conventional MOSFETs is set to increase for future technology generations. We investigate the impact of material degradation, to determine th

Materials limitations in the design of a

Materials limitations in the design of a microcapsule artifical kidney

✍ Cooney, David O. 📂 Article 📅 1971 🏛 John Wiley and Sons 🌐 English ⚖ 217 KB

Design, fabrication, simulation, and mea

Design, fabrication, simulation, and measurement of a dual-band, planar, compact artificial magnetic conductor

✍ Yading Li; Benjamin F. Johnston; Michael J. Withford; Karu P. Esselle 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 312 KB

## Abstract By introducing two orthogonal gaps to a uniplanar compact photonic bandgap structure, artificial magnetic conductor's resonance frequencies have been significantly reduced. Since this compact pattern needs slots with 0.05‐mm width, the laser micromachining was explored to fabricate the

A new element design for an axis-indepen

A new element design for an axis-independent, tunable, negative-permeability artificial meta-material

✍ Gong Ouyang; Vikram Jandhyala 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 140 KB

## Abstract A new meta‐material element that can realize axis‐independent negative permeability is proposed and analyzed. The element is constructed as an intuitive 3D analog of the well‐known flat split‐ring structure (SRR). Unlike the SRR, the proposed element exhibits negative permeability for t

A New Approach to Nicotine: Symmetry Con

A New Approach to Nicotine: Symmetry Consideration for Synthesis Design.

✍ Tse-Lok Ho; Eugene V. Kuzakov 📂 Article 📅 2005 🏛 John Wiley and Sons ⚖ 8 KB

A New Approach to Nicotine: Symmetry Con

A New Approach to Nicotine: Symmetry Consideration for Synthesis Design

✍ Tse-Lok Ho; Eugene V. Kuzakov 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 93 KB

## Abstract A synthesis of nicotyrine (**9**), and hence formally racemic nicotine, was carried out by elaboration of the 1 : 1 adduct **2** of cycloocta‐1,5‐diene and chlorosulfonyl isocyanate (ClSO~2~NCO). Transformation of adduct **2** into carbamate **4** was followed by ozonolysis, tosylation