✦ LIBER ✦

Length-time and capacity ratio optimization in chromatography

✍ Scribed by Said, A. S.

Publisher: John Wiley and Sons
Year: 1983
Tongue: English
Weight: 195 KB
Volume: 6
Category: Article
ISSN: 0935-6304
DOI: 10.1002/jhrc.1240060408

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Optimization of operating cycle length f

Optimization of operating cycle length for petrochemical units in which capacity changes with time

✍ E. S. Dokuchaev 📂 Article 📅 1974 🏛 Springer US 🌐 English ⚖ 322 KB

Automated optimization of split ratio in

Automated optimization of split ratio in capillary gas chromatography

✍ Nishikawa, Y. ;Miyoshi, S. ;Shyoji, M. ;Braun, G. 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 300 KB 👁 1 views

## Abstract An electronic gas‐flow controller system called Advanced Flow Control (AFC), which controls not only carrier gas pressure at the column inlet but also the total gas flow including the split flow, was designed and evaluated. BASIC programming of repetitive analyses of standard mixtures u

Effect of analysis time on optimum colum

Effect of analysis time on optimum column length in time normalization chromatography

✍ Eli Grushka; Francis B. Lo 📂 Article 📅 1974 🏛 Elsevier Science 🌐 English ⚖ 900 KB

The effect of the carrier velocity on the optimum length in time normalization chromatography (or analysis at constant retention time) was investigated. It was found both theoretically and experimentally that at any given carrier velocity (or analysis time) the resolution can be optimized. The leng

Optimization of selectivity, detectabili

Optimization of selectivity, detectability and analysis time in high-performance liquid chromatography

✍ S. Ahuja 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 590 KB

The resolution requirements in pharmaceutical analysis by high-performance liquid chromatograpy are frequently higher than those for other multicomponent separations where the components are present in similar proportion. Furthermore, it is often necessary to separate a large number of components mo

Joint distribution of sojourn time and q

Joint distribution of sojourn time and queue length in the M/G/1 queue with (in) finite capacity

✍ O.J. Boxma 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 441 KB

EXPLOITING DESIGN LENGTH SCALES IN STRUC

EXPLOITING DESIGN LENGTH SCALES IN STRUCTURAL OPTIMIZATION

✍ JANE ZHANG; WILLIAM J. ANDERSON 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 284 KB 👁 1 views

Many structural optimization methods use geometric length scales as well as artificially imposed lengths such as finite element dimensions. One considers functions defined over these dimensions in characterizing and solving the problem. The natural length scales involved in the proposed design chang