✦ LIBER ✦

Fluorocarbon Resist for High-Speed Scanning Probe Lithography

✍ Scribed by Marco Rolandi; Itai Suez; Andreas Scholl; Jean M. J. Fréchet

Publisher: John Wiley and Sons
Year: 2007
Tongue: English
Weight: 337 KB
Volume: 119
Category: Article
ISSN: 0044-8249
DOI: 10.1002/ange.200701496

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fluorocarbon Resist for High-Speed Scann

Fluorocarbon Resist for High-Speed Scanning Probe Lithography

✍ Marco Rolandi; Itai Suez; Andreas Scholl; Jean M. J. Fréchet 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 337 KB

A New Scanning Probe Lithography Scheme

A New Scanning Probe Lithography Scheme with a Novel Metal Resist

✍ M. Rolandi; C.F. Quate; H. Dai 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 276 KB

Dendrimer-Based Self-Assembled Monolayer

Dendrimer-Based Self-Assembled Monolayers as Resists for Scanning Probe Lithography

✍ David C. Tully; Kathryn Wilder; Jean M. J. Fréchet; Alexander R. Trimble; Calvin 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 376 KB 👁 2 views

Hard tips for improving scanning probe l

Hard tips for improving scanning probe lithography

📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 314 KB

Multi-layered resist process in nanoimpr

Multi-layered resist process in nanoimprint lithography for high aspect ratio pattern

✍ Takaaki Konishi; Hisao Kikuta; Hiroaki Kawata; Yoshihiko Hirai 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 591 KB

Multi-layered resist process for nanoimprint lithography is newly proposed to fabricate high aspect ratio pattern under low pressured condition. A low molecular weight polymer is coated on a high molecular weight polymer and a mold is pressed to the bi-layered resist structure over the glass transit

Highly reproducible technique for three-

Highly reproducible technique for three-dimensional nanostructure fabrication via anodization scanning probe lithography

✍ SunHyung Lee; Nahiro Saito; Osamu Takai 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 367 KB