𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fiber-optic Fabry–Perot flow sensor

✍ Scribed by J. X. Fang; H. F. Taylor; H. S. Choi

Publisher
John Wiley and Sons
Year
1998
Tongue
English
Weight
119 KB
Volume
18
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

A new design of a ¨ortex-shedding flowmeter with a ( ) fiber-optic Fabry᎐Perot interferometer FFPI as the sensing element is described here to measure the liquid flow ¨elocity in a pipe. The flow ¨elocity is determined by measuring the frequency at which the reflected optical power from the FFPI is modulated. Experimentally, a linear dependence of optical modulation frequency on flow ¨elocity is obser¨ed o¨er the range from 0.14 to 3.0 mrs, in good agreement with theoretical prediction.

📜 SIMILAR VOLUMES

Tapered optical-fiber temperature sensor
Tapered optical-fiber temperature sensor
✍ P. Datta; I. Matías; C. Aramburu; A. Bakas; M. López-Amo; J. M. Otón 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 475 KB

## Optical power transmission changes of 10-20 dB have been experimen- tally demonstrated by ualying the temperature of a tapered monomode optical jiber that is fixed to a glass plate by two drops of adhesiue. The effect arises from different expansion coeficients of the glass substraie and the si

Multiwavelength generation in an erbium–
Multiwavelength generation in an erbium–doped fiber laser using a Fabry–Perot filter
✍ Jianjun Yu; Kejian Guan; Bojun Yang 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 146 KB

the sense of giving the highest unloaded Q for the specified cylindrical helix diameter to shield the distance and wire size to the pitch ratio. A comparison between the experimental values and the numerical results here is shown as in Figure 3. From the comparison, it can be seen that the analysis

Ionic optodes: role in fiber optic chemi
Ionic optodes: role in fiber optic chemical sensor technology
✍ Kevin Langry; B Rambabu 📂 Article 📅 1999 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 233 KB 👁 1 views

Fiber optic chemical sensors and solid state devices are two versatile sensing technologies for detecting analytes in a host of media. Obvious differences distinguish these technologies: however, they share signi®cant features and issues related to analyte identi®cation and selectivity. This report

Evaluation of a separation-based fiber-o
Evaluation of a separation-based fiber-optic sensor for process analysis
✍ Jason E. Dickens; Michael J. Sepaniak 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 120 KB 👁 2 views

A novel separation-based fiber-optic sensor SBFOS with potential for industrial process and waste analyses is described. The SBFOS is a chemical monitor that integrates the separation selectivity afforded by capillary electrophoresis with the remote and high sensitivity capabilities of laser-induced