migrates through the seal faces (13a & 13b) to compartment 17. The fluid pressure in compartment 17 then counteracts the pressure exerted in compartment 19, ensuring minimal physical contact between the rotor and stator sealing faces, This in turn decreases friction generation, which permits the sea
Face seal and bellows rotary annular seal
- Publisher
- Elsevier Science
- Year
- 2001
- Tongue
- English
- Weight
- 392 KB
- Volume
- 2001
- Category
- Article
- ISSN
- 1350-4789
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
This patent provides details of a rotary joint that is designed for the transfer of low-temperature refrigerant with a minimal running cost. The joint has a series of bellows-type mechanical seals isolating the transfer passages. Patent WO/2009/122782 appears to provide more detail on the sealing sy
## Technology insight Bellows seals with split, replaceable faces Flexibox Sweden has been supplying seals of the FFSM type for water Jet propulsion units for more than ten years. The seal sizes have ranged from 80 to 300 ram. These seals have given good performance with excellent lifetimes. Howe
This patent details a pipe coupling that uses an approximate 'W-section' seal which sits across the pipe joint. It is contained in an outer housing that surrounds the seal and clips into a groove close to the end of the two pipe sections.
## Metal-faced rotary seals target arduous applications P ioneer Weston has combined two areas of Eriks Group's expertise to develop a new range of metal-faced rotary seals for arduous applications. The new range draws on a combination of the firm's experience of designing, developing and manufact
This patent describes a pump for liquid chromatography applications. It is specifically designed to operate without lubricants that could cause contamination of the samples. The seals described are designed to run without lubricant and prevent cross contamination of samples. They are spring energise