Fabrication of pulsed-laser deposited V2O5 thin films for electrochromic devices
β Scribed by Yusuke Iida; Yoshikazu Kaneko; Yoshinori. Kanno
- Publisher
- Elsevier Science
- Year
- 2008
- Tongue
- English
- Weight
- 499 KB
- Volume
- 197
- Category
- Article
- ISSN
- 0924-0136
No coin nor oath required. For personal study only.
β¦ Synopsis
V 2 O 5 thin films were prepared by using pulsed-laser deposition technique. The influences of substrate temperature and oxygen partial pressure on the growth of V 2 O 5 films were studied. X-ray diffraction, atomic force microscopy, Raman measurements and the optical transmission measurements have been carried out in order to understand the growth mechanisms and the electrochromic parameters of the deposited films. We can understand that the structure of the V 2 O 5 thin film deposited at a low substrate temperature was broken by the insertion and extractions of lithium ions with increasing cycle number of electrochemical react. The surface morphology of the films deposited at T s = 623 K and pO 2 = 13.3 Pa is suitable for an electrochromic devices.
π SIMILAR VOLUMES
Elemental depth profile examined using secondary-ion mass spectroscopy and structural profile examined using grazing-incident X-ray difiactometry were applied to analyze the growth behavior of Pb, -, La,(Zr,Ti, ~ ,)03 (PLZTO) and Pb, -La,TiO, (PLTO) thin films deposited on a Si substrate. When depos
Nanostructured TiO 2 thin films were prepared by pulsed laser deposition (PLD) on indium-doped tin oxide (ITO) substrates. Results from X-ray photoelectron spectroscopy (XPS) show that Ti 2p core level peaks shift toward the lower binding energy with decrease in the buffer gas pressure (O 2 :Ar = 1:
Thin films of superconducting TmBaaCu3OT\_ 6 have been deposited on (100) MgO substrates by pulsed-laser deposition. The zero-resistance temperatures achieved were, typically, T~o= 88 K and the critical current densities, jc (77 K), in excess of I0 e A/ cm 2.