𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fabrication and characterization of hollow metal waveguides for

✍ Scribed by Robert Bicknell; Laura King; Charles E. Otis; Jong-Souk Yeo; Neal Meyer; Pavel Kornilovitch; Scott Lerner; Lenward Seals


Publisher
Springer
Year
2009
Tongue
English
Weight
468 KB
Volume
95
Category
Article
ISSN
1432-0630

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Characterization and fabrication of InGa
✍ A. Beaurain; S. Dupont; H. W. Li; J. P. Vilcot; C. Legrand; J. Harari; M. Consta πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 160 KB

## Abstract InGaAsP/InP micro‐waveguides are fabricated by a deep (>3 ΞΌm) Reactive Ion Etching. The devices losses are measured by the Fabry–Perot technique for guide width contained between 10 ΞΌm and 0.5 ΞΌm. The measured losses range from 2 dB/mm to 14 dB/mm. Β© 2004 Wiley Periodicals, Inc. Microwa

Fabrication and optical characterization
✍ N. Daldosso; M. Melchiorri; F. Riboli; F. Sbrana; L. Pavesi; G. Pucker; C. Kompo πŸ“‚ Article πŸ“… 2004 πŸ› Elsevier Science 🌐 English βš– 255 KB

In view of the integration within Si-based optical devices, LPCVD (low-pressure chemical vapor deposition) thin-film Si 3 N 4 waveguides have been fabricated on a Si substrate within a CMOS fabrication pilot-line. Different structures (channel, rib and strip-loaded) were designed, fabricated and cha