𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fabrication and characterization of double-diffused waveguides

✍ Scribed by G. S. Agapiou; C. M. Verber

Publisher
Springer
Year
1995
Tongue
English
Weight
294 KB
Volume
27
Category
Article
ISSN
0306-8919

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Characterization and fabrication of InGa
Characterization and fabrication of InGaAsP/InP deep-etched micro-waveguides
✍ A. Beaurain; S. Dupont; H. W. Li; J. P. Vilcot; C. Legrand; J. Harari; M. Consta 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 160 KB

## Abstract InGaAsP/InP micro‐waveguides are fabricated by a deep (>3 μm) Reactive Ion Etching. The devices losses are measured by the Fabry–Perot technique for guide width contained between 10 μm and 0.5 μm. The measured losses range from 2 dB/mm to 14 dB/mm. © 2004 Wiley Periodicals, Inc. Microwa

Fabrication and optical characterization
Fabrication and optical characterization of thin two-dimensional Si3N4 waveguides
✍ N. Daldosso; M. Melchiorri; F. Riboli; F. Sbrana; L. Pavesi; G. Pucker; C. Kompo 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 255 KB

In view of the integration within Si-based optical devices, LPCVD (low-pressure chemical vapor deposition) thin-film Si 3 N 4 waveguides have been fabricated on a Si substrate within a CMOS fabrication pilot-line. Different structures (channel, rib and strip-loaded) were designed, fabricated and cha

Laser-assisted fabrication of monomode p
Laser-assisted fabrication of monomode polymer waveguides and their optical characterization
✍ W. Pfleging; S. Finke; E. Gaganidze; K. Litfin; L. Steinbock; R. Heidinger 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 924 KB

## Abstract The local surface modification as well as the direct micro‐ablation of polymethylmethacrylate (PMMA) with UV‐laser radiation was studied with respect to the fabrication of optical monomode waveguides. Different UV sources were applied with a focus on excimer lasers and frequency‐multipl