✦ LIBER ✦

Electrical, optical, and structural characteristics of ITO thin films by krypton and oxygen dual ion-beam assisted evaporation at room temperature

✍ Scribed by H.J. Kim; J.W. Bae; J.S. Kim; K.S. Kim; Y.C. Jang; G.Y. Yeom; N.-E. Lee

Book ID: 114085319
Publisher: Elsevier Science
Year: 2000
Tongue: English
Weight: 431 KB
Volume: 377-378
Category: Article
ISSN: 0040-6090
DOI: 10.1016/s0040-6090(00)01421-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effects of oxygen radical on the propert

Effects of oxygen radical on the properties of indium tin oxide thin films deposited at room temperature by oxygen ion beam assisted evaporation

✍ J.S. Kim; J.W. Bae; H.J. Kim; N.-E. Lee; G.Y. Yeom; K.H. Oh 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 241 KB

Structure, microstructure and optical pr

Structure, microstructure and optical properties of cerium oxide thin films prepared by electron beam evaporation assisted with ion beams

✍ Catalina Mansilla 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 957 KB

Structural, electrical and optical prope

Structural, electrical and optical properties of indium tin oxide films prepared by low-energy oxygen-ion-beam assisted deposition

✍ C. Liu; T. Matsutani; T. Asanuma; M. Kiuchi 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 124 KB

Influence of oxygen gas content on the s

Influence of oxygen gas content on the structural and optical properties of ZnO thin films deposited by RF magnetron sputtering at room temperature

✍ Baoting Liu; Yang Zhou; Hongfang Zheng; Man Li; Zhe Guo; Qingxun Zhao; Yingcai P 📂 Article 📅 2011 🏛 Nonferrous Metals Society of China 🌐 English ⚖ 867 KB

Structure, optical and electrical proper

Structure, optical and electrical properties of Al:ZnO thin films deposited by DC sputtering at room temperature on glass and plastic substrates

✍ Guillén, C. ;Herrero, J. 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 493 KB

## Abstract Transparent and conductive Al‐doped ZnO (AZO) films with thickness between 0.2 and 1.1 μm were deposited by sputtering at room temperature on glass and polyethylene terephthalate (PET) substrates. All films were polycrystalline with average crystallite size increasing when the film thic