𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Dual-wavelength injection seeded Q-switched fiber ring laser

✍ Scribed by Peter D. Dragic

Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
281 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

We present a dual longitudinal mode narrow linewidth, injection‐seeded, Q‐switched fiber ring laser. Deeply modulated pulses near 1.55 μm with a modulation frequency that can be tuned continuously from DC to a demonstrated 25 GHz have been achieved. High peak powers are attained through the use of a reduced‐stimulated Brillouin scattering single‐clad erbium doped fiber. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 202–204, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23040

📜 SIMILAR VOLUMES

A wavelength tunable Q-switched fiber la
A wavelength tunable Q-switched fiber laser using fiber Bragg gratings
✍ Takeshi Imai; Tetsuro Komukai; Takashi Yamamoto; Masataka Nakazawa 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 417 KB

This paper reports on a Q-switched Er-doped fiber laser using the stress dependence of a wavelength of reflected light from fiber Bragg gratings. The laser cavity consists of a 0.5-m-long Er-doped fiber and two fiber gratings (FG) attached at both ends of the fiber. The pump laser is a 1.48 mm semic

Tunable dual-wavelength linear-cavity fi
Tunable dual-wavelength linear-cavity fiber laser by using an external injection-seeding scheme
✍ Peng-Chun Peng; Sien Chi 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 97 KB

## Abstract In this paper, we propose and demonstrate a tunable dual‐wavelength fiber laser by using an external injection‐seeding scheme with a Fabry–Perot laser diode. The wavelength tuning range of this tunable dual‐wavelength fiber laser is 12.6 nm, and the optical side‐mode suppression ratio (

Switchable dual-wavelength erbium-doped
Switchable dual-wavelength erbium-doped fiber ring laser using bending dependent loss to switch the operating wavelength
✍ S.-P. Chen; L. Ding; S.-M. Wang; Y.-G. Li; K.-C. Lu; S.-H. Zhou 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 128 KB

A short wavelength band erbium-doped fiber (EDF) ring laser emitting simultaneously at 1488.9 and 1533.9 nm is demonstrated. The erbium-doped gain fiber has a depressed cladding to suppress emission at longer wavelengths. The shorter emitting wavelength is selected by a fiber Bragg grating (FBG), wh

All-fiber actively Q-switched Er3+/Yb3+
All-fiber actively Q-switched Er3+/Yb3+ co-doped ring laser
✍ Shu-Min Zhang; Fu-Yun Lu; Jian Wang 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 315 KB

## Abstract We report on a all‐fiber actively Q‐switched laser based on a Mach‐Zehnder interferometer (MZI). One of the arms of the MZI is bonded on a piezoelectric transducer (PZT). The path length difference between those two arms will change when a RF electric signal is applied drives the PZT, a

Switchable dual-wavelength erbium-doped
Switchable dual-wavelength erbium-doped fiber-ring lasers using a fiber Bragg grating in high-birefringence fiber
✍ Chun-Liu Zhao; Xiufeng Yang; Jun Hong Ng; Xinyong Dong; Xin Guo; Xiaoyan Wang; X 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 71 KB

## Abstract A simple switchable dual‐wavelength Er‐doped fiber‐ring laser using a fiber Bragg grating (FBG) written in high‐birefringence (HiBi) fibers is proposed. Due to the two‐peak reflections with orthogonal polarizations of the FBG, the polarization hole‐burning effect in the cavity is greatl

Coherent combining of Q-switched fiber l
Coherent combining of Q-switched fiber lasers based on a fiber grating ring mirror
✍ Wei Dai; Guo Wengang; Wang Hongjie; Lu Fuyun 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 244 KB

## Abstract A coherent combining of two Q‐switched fiber lasers based on a multiarm resonator of interferometric configuration is demonstrated. The lasers share a same fiber grating ring mirror as a Q‐switch and generate a stable pulse series. Under a 23‐KHz pulse repetition, a 10‐mW average output