## Abstract A dual‐mode bandpass filter using stub‐loaded resonators with internal coupled lines for high‐selectivity application has been presented. Based on the odd‐ and even‐mode equivalent circuits, the resonant characteristics of the proposed microstrip resonator are investigated. The proposed
Dual-mode bandpass filters using triangular ring resonators with coupling stubs
✍ Scribed by Min Hung Weng; Cheng-Yuan Hung; Wu-Nan Chen
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 114 KB
- Volume
- 43
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel dual‐mode bandpass filter using a microstrip triangular ring resonator with coupling stubs has been designed and tested. The basic configuration of this novel dual‐mode filter is a triangular ring resonator. Quasi‐L‐shaped I/O arms used as coupling stubs for enhanced coupling are nonorthogonally and symmetrically separated on each corner of the triangular resonator, and a perturbation element is introduced within the resonator at a symmetrical location. The effects of the lengths of the coupling stubs and the width of the perturbation element are studied. New filters having narrower or wider bandwidth and transmission zeros are presented. The proposed filter responses are in good agreement with the simulations and experiments. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 43: 512–515, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20519
📜 SIMILAR VOLUMES
## Abstract This article presents a novel miniaturized bandpass filter using a square ring. Each side of the ring is loaded almost at one of the ends with a stub. The stub increases the current path length; bring down the resonance frequency of the ring. The other end of each stub is terminated wit
## Abstract A compact dual‐mode bandpass filter (BPF) using equilateral triangular slotted‐patch resonator is proposed, which has the advantages of compact size, low insertion loss, and good passband selectivity because of two transmission zeros located at the low and high stopband. A demonstration
## Abstract A dual‐mode bandpass filter (BPF) using the degenerate modes of a meander square‐ring structure printed on the high‐permittivity substrate is proposed. The dual‐mode resonator is based on a square‐ring loaded with two meander strips at the coupling sides. The filter is printed on the Al
## Abstract In this article, compact microstrip bandpass filters using dual‐mode stub‐loaded resonators and capacitive/inductive source‐load coupling are presented to realize opposite asymmetric quasi‐elliptic responses. Two transmission zeros are generated in each design to sharpen the cutoff slop