## Abstract A novel dual‐mode bandpass filter using a microstrip triangular ring resonator with coupling stubs has been designed and tested. The basic configuration of this novel dual‐mode filter is a triangular ring resonator. Quasi‐L‐shaped I/O arms used as coupling stubs for enhanced coupling ar
New microstrip ring dual-mode bandpass filters with interdigital coupling structure
✍ Scribed by Hyun-Joo Park; Woo-Chul Jung; Jong-Chul Lee; Jong-Heon Kim; Byungje Lee; Nam-Young Kim
- Publisher
- John Wiley and Sons
- Year
- 2000
- Tongue
- English
- Weight
- 314 KB
- Volume
- 28
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract A dual‐mode bandpass filter (BPF) using microstrip patch resonator is proposed. Open‐stubs are added on the feed‐lines to suppress the spurious response and improve the stopband rejection effectively with little increase in circuit size. Furthermore, a reduced‐size dual‐mode BPF with sp
## Abstract This paper presents a novel, compact, low‐insertion‐loss, sharp‐rejection, wideband microstrip bandpass filter. The filter is based on a ring resonator with direct‐connected orthogonal feed lines, and uses two stepped‐impedance open stubs to construct a wideband passband with two sharp
## Abstract A novel compact dual‐mode microstrip bandpass filter (BPF) with adjustable transmission zero (TZ) is proposed. It is composed of a nested microstrip square‐loop resonator. The filter with two TZs in the lower and upper stopbands is designed, fabricated, and measured. A circuitry size re
## Abstract A dual‐mode bandpass filter with a high selective performance for dual‐band application is presented in this article.The filter is designed with square loop resonator with tree‐shaped patches attached to the four inner corners of the loop, which equivalents to load capacitors in the inn
## Abstract A novel microstrip bandpass filter using a dual‐mode square‐ring resonator is presented in this paper, in which the input/output microstrip lines are arranged under the square‐ring to improve the coupling between the microstrip lines and the square‐ring. The filter has been investigated