## Abstract A dual‐mode bandpass filter using stub‐loaded resonators with internal coupled lines for high‐selectivity application has been presented. Based on the odd‐ and even‐mode equivalent circuits, the resonant characteristics of the proposed microstrip resonator are investigated. The proposed
Compact microstrip bandpass filters using dual-mode stub-loaded resonators and capacitive/inductive source-load coupling
✍ Scribed by Amir Torabi; Keyvan Forooraghi; Omid Manoochehri; Seyyedpayam Abbasiniazare
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 447 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this article, compact microstrip bandpass filters using dual‐mode stub‐loaded resonators and capacitive/inductive source‐load coupling are presented to realize opposite asymmetric quasi‐elliptic responses. Two transmission zeros are generated in each design to sharpen the cutoff slope at the two sides of the passband. Both the coupling matrix and the equivalent circuit approaches are adopted to investigate the operating mechanism of the proposed filters. Restrictions imposed on the individual coupling coefficients by the implementation of this type of filters are discussed in detail. The proposed bandpass filters are designed at the center frequency of 2.4 GHz with the bandwidth of 200 MHz. The simulated and measured results are presented. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26215
📜 SIMILAR VOLUMES
## Abstract In this article, a dual‐band bandpass filter is designed by using microstrip stub‐loaded two‐mode resonators. Because the resonant frequencies of the odd‐mode and even‐mode of the stub‐loaded resonator can be varied individually, the midband frequencies of the dual‐bands of filter can b
## Abstract This article presents a novel miniaturized bandpass filter using a square ring. Each side of the ring is loaded almost at one of the ends with a stub. The stub increases the current path length; bring down the resonance frequency of the ring. The other end of each stub is terminated wit
## Abstract A compact microstrip triple‐mode stub‐loaded stepped impedance resonator (SIR) and bandpass filter (BPF) are proposed in this letter.As a starting part of designing a triple‐mode BPF, the initial miniaturization dual‐mode folded __T__‐type open stub‐loaded SIR characteristic is investig
## Abstract Compact dual‐band bandpass filter using short stub loaded resonators is presented in this letter, the proposed resonator possesses the advantage that its center frequency of the even mode can be flexibly controlled, whereas that of the odd‐mode is fixed. A dual‐band filter using pseudo‐
## Abstract A novel transversal bandpass filter is proposed in this letter. Different from conventional two‐order planar transversal filter, the proposed filter is a three‐order planar transversal filter by incorporating microstrip dual‐mode open‐loop resonator and slot line resonator. Furthermore,