The temperature distribution alongthe vertical pores of the anodicoxide films onalumhrium was calculated for usual conditions of anodizing in 10% sulphuric acid solution by taking into account the accumulation of both Joule heat and the heat of formation of oxide at the pore-base and the outward con
Dissolution of the anodic oxide film on aluminium in a sulphuric acid solution
โ Scribed by M. Nagayama; K. Tamura
- Publisher
- Elsevier Science
- Year
- 1967
- Tongue
- English
- Weight
- 700 KB
- Volume
- 12
- Category
- Article
- ISSN
- 0013-4686
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
The anodic dissolution of lead in perchloric acid-sulphuric acid mixtures has been studied using potentiodynamic sweeps and current step measurements. As the surface concentration of lead increases, lead sulphate precipitates at the surface. This solid phase is not in equilibrium with the bulk solut
The growth of multilayer oxide films on smooth platinum anodes in O-5 M HISOl has been investigated under the potentiostatic conditions where oxygen was evolved vigorously. The range of anodizing condition covered was : electrode potential, 207-2.22 V(nhe); 20-35ยฐC; duration up to 60 min. The growth
The anodic d i w d u t i o n of vanadium in 0.5 H,SO, in the potential range of E,,,,, to 2000 mV (SCE) was investigated by DC polarization electrochemical impedance spectroscopy, (EIS). The impedance behavior can be satisfactory described by a series of corrosion reactions where changes in the surf
The rate of dissolution of Armco Fe has been measured as a function of time for deaerated solutions of constant ionic strengtb (HCl + NaCl). For pH < 1.5, no appreciable change of the measured polarisation resistance was observed. For 1.5 -=I pH < 3 the polarisation resistance gave straight lines w