The anodic dissolution of lead in perchloric acid-sulphuric acid mixtures has been studied using potentiodynamic sweeps and current step measurements. As the surface concentration of lead increases, lead sulphate precipitates at the surface. This solid phase is not in equilibrium with the bulk solut
Impedance Behavior of Anodic Dissolution of Vanadium in Sulphuric Acid
β Scribed by Dr. Magda A. M. Ameer
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 426 KB
- Volume
- 28
- Category
- Article
- ISSN
- 0933-5137
No coin nor oath required. For personal study only.
β¦ Synopsis
The anodic d i w d u t i o n of vanadium in 0.5 H,SO, in the potential range of E,,,,, to 2000 mV (SCE) was investigated by DC polarization electrochemical impedance spectroscopy, (EIS). The impedance behavior can be satisfactory described by a series of corrosion reactions where changes in the surface during the various stages of corrosion are emphasized. Study of the effect of temperature on the vanadium at open circuit potential and the value of activation energy support one-electron transfer step as the rate-determining corrosion process.
π SIMILAR VOLUMES
Abetract-The anodic passivation of iron was examined with respect to the degree of proton hydration as well as the acid structure. The investigation was based on the electrochemical tneasurements, XPS study and sulphur dioxide analysis. When acid concentration is low, the passivity of iron is a resu
The variations of the equivalent parallel resistance and capacitance of anodic films formed on Ta and Nb in varying concentrations of H2SO4 suggest that the volume of film formed per coulomb is much greater in 100)~, acid, although the dielectric constant is substantially unchanged. The field requir
Stationary electrodes prepared from the sintered tungsten carbide (WC, M) containing 10 ~01% of M = Co, Ni or Fe binder, with Vickers hardness > 1200 kg mm-', have been investigated in 0.5 M H,SO, using the Scanning Electron Microscopy (SEM) and the Electrochemical Impedance Spectroscopy (EIS) metho
The anodic behaviour of vanadium in acid solutions was studied in the presence of various anions and cations. Vanadium shows active hehaviour in all the solutions tested, except for some barium containing ones at pH >4, in which the metal is passivated at potentials positive to 0.09 V&e). It is foun