A 5.2-GHz monolithic low-power low-noise amplifier (LNA) with a quasi-cascode configuration using InGaP-GaAs HBT technology is reported for the first time. A state-of-the-art noise figure of 2.39 dB at 5.2 GHz is obtained among all bipolar LNAs with a fully on-chip input-matching network. The input
Design of an ultra-low-noise 1.75-GHz VCO using InGaP/GaAs HBT technology
✍ Scribed by Sungwon Jeon; Sangseol Lee
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 120 KB
- Volume
- 41
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
An integrated voltage‐controlled oscillator (VCO) operating at 1.75 GHz is designed using the InGaP/GaAs HBT process. The proposed noise‐removal circuit and FR‐4 substrate structure in this paper show an improved characteristic of phase noise and a smaller VCO dimension, respectively. The frequency‐tuning range of the VCO is about 200 MHz and the phase noise at 120‐KHz offset is −119.3 dBc/Hz. The power consumption of the VCO core is 11.2 mW at 2.8‐V supply voltage and the output power is −2 dBm. The calculated figure of merit (FOM) is 191.7, which shows the best performance, as compared with the previous FET or HBT VCOs. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 41: 196–198, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20090
📜 SIMILAR VOLUMES
## Abstract This paper describes fully integrated low‐phase‐noise MMIC voltage‐controlled oscillators (VCOs) for an adaptive‐feedback interference‐cancellation system (AF‐ICS). The asymmetric‐ and symmetric‐inductance tank structures were combined with VCOs to obtain VCOs with low‐phase‐noise perfo
## Abstract A monolithic concurrent dual‐band low‐noise amplifier (LNA) using InGaP/GaAs HBT technology is demonstrated for the first time. The LNA provides narrowband gain and matching simultaneously at both 1.57‐GHz (GPS) and 5.25‐GHz (ISM) bands. It consumes only 15‐mW power and achieves transdu