𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Depth analysis of electrodeposited iron–nickel and copper–zinc alloy coatings by glow discharge emission spectroscopy

✍ Scribed by W. B. Teo; K. Hirokawa

Publisher
John Wiley and Sons
Year
1988
Tongue
English
Weight
556 KB
Volume
11
Category
Article
ISSN
0142-2421

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Depth profiling studies of oxidized allo
Depth profiling studies of oxidized alloy surfaces by glow discharge emission spectroscopy
✍ K. Tsuji; K. Hirokawa 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 507 KB

## Abstract Depth profile analyses of elemental composition of Cu–Ni and Fe–Cr binary alloys oxidized in air and O~2~ gas mixtures were performed by glow discharge emission spectroscopy (GDS), adopting the cathode sputtering technique with a Grimm‐type glow lamp. The emission intensity ratio of Cu

Development of a standard method for qua
Development of a standard method for quantitative depth profile analysis of zinc-based metallic coatings by direct current glow discharge optical emission spectroscopy
✍ Bengtson, Arne; Hänström, Sofia; Lo Piccolo, Eugenio; Zacchetti, Nicoletta; Meil 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 364 KB 👁 2 views

A method for the determination of the thickness and composition of zinc-based coatings on steel has been developed. The method is based on direct current glow discharge optical emission spectroscopy (GD-OES). Six different types of coated materials supplied by five major European steel producers hav

Depth analysis of nickel thin films on s
Depth analysis of nickel thin films on silicon by glow discharge spectroscopy: The interface region
✍ Zdeněk Weiss 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 457 KB

## Abstract Depth profiles of nickel thin films on silicon obtained with a Grimm glow discharge lamp operating at various conditions were compared. The best conditions for the profile analysis are: high argon pressure, high discharge current and low discharge voltage. The signal response at the int

Depth Profile Analysis of Multilayer Ni-
Depth Profile Analysis of Multilayer Ni-Fe Alloy Coatings by Glow Discharge Optical Emission Spectroscopy (GDOES) and Energy Dispersive X-ray (EDX) Linescan—a Comparative Study
✍ Ives, M.; Lewis, D. B.; Lehmberg, C. 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 508 KB

A comparative study of two techniques to depth proÐle multilayer Ni-Fe alloy coatings has been performed. Both conventional cross-sectioning with energy-dispersive x-ray imaging (EDX) and glow discharge optical emission spectroscopy (GDOES) sputter depth proÐling methods have been compared in terms

Depth profile analysis of an electrodepo
Depth profile analysis of an electrodeposited multilayer structure with non-uniform thickness distribution by glow discharge optical spectroscopy
✍ Zdeněk Weiss 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 366 KB

## Abstract An electrodeposited multiplayer structure consisting of nine alternating layers of copper and nickel was depth profiled by glow discharge emission spectroscopy using a Grimm lamp with an anode tube of internal diameter 4 mm. Depth profiled of the non‐uniform region near the sample edge