𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Cure modelling of polyester thermosets in a glass mould

✍ Scribed by Vanja Kosar; Hrvoje Šercer; Vesna Tomašić

Book ID
113533454
Publisher
Institution of Chemical Engineers
Year
2012
Tongue
English
Weight
848 KB
Volume
90
Category
Article
ISSN
0263-8762

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Increase in cure of thermosets after ext
Increase in cure of thermosets after extraction out of the mould
✍ S. Tadlaoui; K. Azaar; A. El Brouzi; R. Granger; J.M. Vergnaud 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 521 KB

Complete cure of thermosets in the mould may necessitate a long period of time, and is therefore costly. On the other hand, the temperature throughout the thermoset sample is rather high at the time of its extraction from the mould. The process of cure can be described by numerical models, not only

Process of cure of a maleic polyester re
Process of cure of a maleic polyester resin. Modelling and experiments with thin slab in metal mould
✍ K. Azaar; A. El Brouzi; R. Granger; J.M. Vergnaud 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 376 KB

The process of cure has been studied for a loaded maleic polyester resin. Experiments were carried out by using a metal mould heated by silicone oil. A numerical model was built in order to describe the process and it was tested. The model based on a numerical method with finite differences takes in

Modelling the cure of a gelcoat film mad
Modelling the cure of a gelcoat film made of unsaturated polyester
✍ A. Sahli; R. Granger; J.M. Vergnaud 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 440 KB

gelcoat made of pure unsaturated polyester and deposited on the surface of a loaded polyester is studied. The problem of the cure of a gelcoat is considered by taking into account heat evolved from the cure reaction, heat transferred by conduction through the resin and support and heat convection on