✦ LIBER ✦

Combustion of methane over La0.66Sr0.34Ni0.3Co0.7O3 and La0.4Sr0.6Fe0.4Co0.6O3 prepared by freeze-drying

✍ Scribed by D. Klvana; J. Vaillancourt; J. Kirchnerova; J. Chaouki

Publisher: Elsevier Science
Year: 1994
Tongue: English
Weight: 762 KB
Volume: 109
Category: Article
ISSN: 0926-860X
DOI: 10.1016/0926-860x(94)80117-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The transient response study of CO, CO2,

The transient response study of CO, CO2, and O2 adsorption and CO oxidation over La0.4Sr0.6Co0.4Mn0.6O3

✍ Rong Li; Shui-Xian Yu; Fu-Shan Wang; Sheng-Lian Sun; Jian-Tai Ma 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 100 KB 👁 1 views

## Abstract The transient behaviour caused by the change of the component concentration for CO oxidation on the perovskite‐type catalyst La~0.4~Sr~0.6~Co~0.4~Mn~0.6~O~3~ was investigated. Results showed that CO was not adsorbed on the catalyst surface and CO oxidation was carried out between the su

Structure, chemical stability and electr

Structure, chemical stability and electrical conductivity of perovskite La0.6Sr0.4M0.3Fe0.7O3−δ (M = Co, Ti) oxides

✍ Hui Lu; Jong Pyo Kim; Sou Hwan Son; Jung Hoon Park 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 1019 KB

Flame Spray Synthesis of Nanoscale La0.6

Flame Spray Synthesis of Nanoscale La0.6Sr0.4Co0.2Fe0.8O3–δ and Ba0.5Sr0.5Co0.8Fe0.2O3–δ as Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells

✍ A. Heel; P. Holtappels; P. Hug; T. Graule 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 842 KB

One of the primary scientific aims within the solid oxide fuel cell (SPOFC) community is to lower the operating temperature of an SOFC system from about 800-1,000 °C to intermediate temperatures of about 600 °C [1]. The lower operating temperature decreases thermal stress in the materials and offers

Preparation of La0.6Sr0.4Co0.2Fe0.8O3 na

Preparation of La0.6Sr0.4Co0.2Fe0.8O3 nanoceramic cathode powders for solid oxide fuel cell (SOFC) application

✍ M. Ghouse; Y. Al-Yousef; A. Al-Musa; M.F. Al-Otaibi 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 1021 KB

The La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) nanoceramic powders were prepared by solegel process using nitrate based chemicals for SOFC applications since these powders are considered as more promising cathode materials for SOFC. The citric acid was used as a chelating agent and ethylene glycol as a

Electrical conductivity of epitaxial La0

Electrical conductivity of epitaxial La0.6Sr0.4Co0.2Fe0.8O3−δ thin films grown by pulsed laser deposition

✍ Ali Zomorrodian; Hadi Salamati; Zigui Lu; Xin Chen; Naijuan Wu; Alex Ignatiev 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 768 KB

Epitaxial La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3Àd (LSCF) thin films have been grown successfully on single crystal LaAlO 3 substrate by pulsed laser deposition (PLD). AFM micrographs have shown a rms roughness of 5 A for the 550 C deposited films. The films further exhibited electrical conductivities of a

Low-Temperature Preparation of La0.6Sr0.

Low-Temperature Preparation of La0.6Sr0.4Fe0.8Co0.2O3–δ Sinterable Nanopowders by the Polymeric Organic Complex Solution Method

✍ J. M. Perez-Falcon; A. Moure; J. Tartaj 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 789 KB

## Abstract In this work, powders of La~0.6~Sr~0.4~Fe~0.8~Co~0.2~O~3–δ~ were prepared by the auto‐combustion of ethylene glycol–metal nitrate polymerised gel precursor. This method (polymeric organic complex solution) allows decreasing the processing temperature and simplifies the whole procedure.