𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Characterization of Amorphous LiNiVO4 Thin-Film Anode Grown by Pulsed Laser Deposition.

✍ Scribed by S. B. Tang; H. Xia; M. O. Lai; L. Lu

Publisher
John Wiley and Sons
Year
2006
Weight
10 KB
Volume
37
Category
Article
ISSN
0931-7597

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.

πŸ“œ SIMILAR VOLUMES

KTiOAsO4 Thin Films Prepared by Pulsed L
KTiOAsO4 Thin Films Prepared by Pulsed Laser Deposition
✍ Yu Liao; Xiu Wang πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 37 KB πŸ‘ 2 views

A pulsed Nd:YAG Laser was used to evaporate solid targets of KTiOAsO 4 (KTA) at power densities of 0.6 to 2.0Γ—10 9 W/cm 2 . KTA thin films were deposited on glass, Si (100). After proper annealing treatment, single phase, (orthorh-ombic) polycrystalline KTA thin films were obtained. Some propitious

Biocompatible Mn2+-doped carbonated hydr
Biocompatible Mn2+-doped carbonated hydroxyapatite thin films grown by pulsed laser deposition
✍ E. GyΓΆrgy; P. Toricelli; G. Socol; M. Iliescu; I. Mayer; I. N. Mihailescu; A. Bi πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 275 KB

## Abstract Mn^2+^‐doped carbonated hydroxyapatite (Mn‐CHA) thin films were obtained by pulsed laser deposition on Ti substrates. The results of the performed complementary diagnostic techniques, X‐ray diffraction, infrared spectroscopy, X‐ray photoelectron spectroscopy, and energy dispersive X‐ray

Microstructures of CGO and YSZ Thin Film
Microstructures of CGO and YSZ Thin Films by Pulsed Laser Deposition
✍ A. Infortuna; A. S. Harvey; L. J. Gauckler πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 949 KB

## Abstract Yttrium‐stabilized zirconia (YSZ) and cerium gadolinium oxide (CGO) thin films were prepared by pulsed laser deposition (PLD) under different ambient pressures and substrate temperatures. The microstructures of the obtained films are compared with existing structural zone models for thi