Anodic oxide films formed on Ni and Ni-Cu alloys in a solution of 1.0 MKOH have been analysed by Auger electron spectroscopy. The results indicate that the oxide film formed is predominantly nickel oxide even when the Cu content in the alloy is 70 %, suggesting that Cu in the alloy does not affect t
Auger electron spectroscopy of anodic oxide films on nickel-copper alloys
β Scribed by R.D.K. Misra
- Publisher
- Elsevier Science
- Year
- 1987
- Weight
- 253 KB
- Volume
- 91
- Category
- Article
- ISSN
- 0025-5416
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
In-depth composition profiles of the an&c oxide films grown on Al (1 I1 ), (I 10) and (100) single crystal electrodes in ammonium borate were studied by Auger electron spectroscopy with Ar ion etching. The oxide film had the composition of Ai,O, as referenced to an authentic a-Al,O, single crystal.
Ahtract-Potential modulated reflectance (PMR) spectroscopy has been used to mvestlgate thm anodlc oxide films formed on tltamum m sulphunc acid The ongm of the reflectance modulation IS dlscussed and the expenmental results are compared with theoretlcal calculations based on the three layer model Th
Anodic dissolution of AgPd alloys in 12 M LiCl is being investigated using Auger electron spectroscopy and coulometry for the determination of Pd surface enrichment. Under steady state conditions Ag dissolves selectively in alloys containing < 5 Y0 Pd, while both components dissolve in stoichiometri