𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Analysis of effectiveness of PVC thermal stabilizing agents by conductometric method

✍ Scribed by Jerzy Wypych

Publisher
John Wiley and Sons
Year
1976
Tongue
English
Weight
102 KB
Volume
20
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effect of thermal processing on PVC—
The effect of thermal processing on PVC—IV. Photo-oxidation of stabilized PVC
✍ G. Scott; M. Tahan; J. Vyvoda 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 229 KB

The effects of a tin maleate stabilizer and of typical processing lubricants (Wax E and calcium stearate) on the photo-oxidation of PVC have been examined. The latter are found to have a relatively minor effect but the tin maleate stabilizer introduces an induction period to photo-oxidation, related

The effect of thermal processing on PVC—
The effect of thermal processing on PVC—II. The effect of lubricants and stabilizers
✍ G. Scott; M. Tahan; J. Vyvoda 📂 Article 📅 1978 🏛 Elsevier Science 🌐 English ⚖ 606 KB

The effects of lubricants and a tin maleate stabilizer on the mechanochemical and thermal degradation of PVC during processing have been studied at 170' and 210. The protective mechanism of the two types of additive were found to be complementary in that the lubricants reduced the severity of the me

Effect of stabilizers in the thermal tre
Effect of stabilizers in the thermal treatment of PVC—XVI: Study of the stabilization efficiency of antimony tris(isooctyl thioglycolate) in PVC
✍ Z. Vymazal; Z. Vymazalová; K. Volka; T. Gögh; M. Karvaš 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 349 KB

Antimony tris(isooctyl thioglycolate) [Sb(IOTG)3 ] is a powerful thermal stabilizer for PVC, particularly if added in quantities up to 2% (m/m) with respect to PVC. During the stabilizing action, (IOTG)2SbC1 is formed while the rate of elimination of HCI from the polymer decreases appreciably. The t