๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Adhesive wear in deep drawing of aluminum sheets

โœ Scribed by P. Groche; G. Nitzsche; A. Elsen

Publisher
International Academy for Production Engineering
Year
2008
Tongue
English
Weight
631 KB
Volume
57
Category
Article
ISSN
0007-8506

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Influence of temperature on the initiati
Influence of temperature on the initiation of adhesive wear with respect to deep drawing of aluminum-alloys
โœ P. Groche; G. Nitzsche ๐Ÿ“‚ Article ๐Ÿ“… 2007 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 227 KB

In the past, different models were established to explain the causes of adhesive metal transfer. The initiation of adhesive wear is normally described as a function of mechanical loads acting on local asperities. A possible direct influence of local temperatures on the initiation of adhesive wear is

Cold Deep Drawing of Commercial Magnesiu
Cold Deep Drawing of Commercial Magnesium Alloy Sheets
โœ K. Mori; H. Tsuji ๐Ÿ“‚ Article ๐Ÿ“… 2007 ๐Ÿ› International Academy for Production Engineering ๐ŸŒ English โš– 570 KB

A cold deep drawing process for commercial AZ31 magnesium alloy sheets was developed. The commercial sheets were successfully formed into circular cups at room temperature by optimising the annealing temperature of the sheets, i.e. a limiting drawing ratio of 1.75 was attained for an annealing tempe

Formability characterisation of aluminum
Formability characterisation of aluminum cladded deep drawing sheets for automotive catalytic converters and simular parts
โœ D. Bauer; M. Wendt-Ginsberg ๐Ÿ“‚ Article ๐Ÿ“… 1992 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 268 KB

Aluminium cladded steel sheets are not resistant to ageing. Therefore, it should be expected that both the mechanical properties and the press performance or ductility of them will be depending on time after skin-pass rolling. Results of investigations over a range of 100 days between skin-pass rol