𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Corrosion resistance of deep drawing sheet steel

✍ Scribed by V. V. Ploshkin; P. G. Vaganov; A. M. Ryabyshev

Publisher
Springer US
Year
1982
Tongue
English
Weight
288 KB
Volume
24
Category
Article
ISSN
0026-0673

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Finite element simulation of deep drawin
Finite element simulation of deep drawing of stainless steel sheet with deformation-induced transformation
✍ Kazunari Shinagawa; Ken-ichiro Mori; Kozo Osakada πŸ“‚ Article πŸ“… 1991 πŸ› Elsevier Science 🌐 English βš– 416 KB

Plastic deformation and temperature distribution in deep drawing of stainless steel sheets with deformation-induced martensitic transformation are simulated by using the rigid-plastic finite element method and the finite element method for heat conduction. The variation of the martensite content is

Mechanical Properties and Corrosion Resi
Mechanical Properties and Corrosion Resistance of Nitrided or Oxinitrided, and Powder Painted Regular and Interstitial Free (IF) Drawing Steel Sheet
✍ Z. Rogalski; Z. ŁataΕ› πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 472 KB

## Abstract Specimens of 0.8 mm thick regular and interstitial free (IF) drawing steel sheet have been nitrided in fluidised bed for 2 hours at 620β€ŠΒ°C and 560β€ŠΒ°C with and without a post‐oxidation, and slow and accelerated cooling. As a result, surface hardness, yield and tensile strength of the she

Cold Deep Drawing of Commercial Magnesiu
Cold Deep Drawing of Commercial Magnesium Alloy Sheets
✍ K. Mori; H. Tsuji πŸ“‚ Article πŸ“… 2007 πŸ› International Academy for Production Engineering 🌐 English βš– 570 KB

A cold deep drawing process for commercial AZ31 magnesium alloy sheets was developed. The commercial sheets were successfully formed into circular cups at room temperature by optimising the annealing temperature of the sheets, i.e. a limiting drawing ratio of 1.75 was attained for an annealing tempe

Adhesive wear in deep drawing of aluminu
Adhesive wear in deep drawing of aluminum sheets
✍ P. Groche; G. Nitzsche; A. Elsen πŸ“‚ Article πŸ“… 2008 πŸ› International Academy for Production Engineering 🌐 English βš– 631 KB