## Abstract This article presents a wide locking range injection locked frequency divider (ILFD) implemented using a standard 0.18‐μm CMOS process. The ILFD consists of a double‐cross‐coupled VCO and an injection MOS for coupling injection signal to the resonator. At the supply voltage of 1.8 V, th
A Wide Locking Range LC-Tank Injection-Locked Frequency Divider
✍ Scribed by Sheng-Lyang Jang; Chien-Feng Lee
- Book ID
- 118130963
- Publisher
- IEEE
- Year
- 2007
- Tongue
- English
- Weight
- 428 KB
- Volume
- 17
- Category
- Article
- ISSN
- 1531-1309
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract The design of a frequency divider (FD) employing 3‐dimensional (3D) inductors fabricated in the 0.18‐μm 1P6M CMOS technology is reported. The FD consists of two single‐ended complementary Colpitts oscillators coupled with capacitors to generate differential output signals. The aim of us
## Abstract This article studies two wide‐locking range divide‐by‐4 injection locked frequency dividers (ILFDs) employing tunable active inductor (TAI), which are used to extend the locking range and to reduce die area. The CMOS differential ILFD is based on a TAI‐C tank Colpitts voltage‐controlled
## Abstract This article proposes techniques for improving locking range of divide‐by‐4 injection locked frequency divider (D4ILFD). Two D4ILFDs were designed and implemented. One D4ILFD is made of tapped resonator; the other ILFD is made of switched resonator. Both circuits use a complementary CMO
## Abstract This article designs an injection locked frequency divider (ILFD) based on the direct injection technique and transformer‐coupled VCO topology. At the supply voltage of 3.3 V, the tuning range of the free‐running ILFD is from 2.47 to 2.32 GHz, about 150 MHz, and the locking range of the