𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A technique for preparing electron microscope specimens for dynamic straining experiments

✍ Scribed by I.W. Hall

Publisher
Elsevier Science
Year
1978
Weight
511 KB
Volume
11
Category
Article
ISSN
0026-0800

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Technique for preparing cross-section tr
Technique for preparing cross-section transmission electron microscope specimens from ion-irradiated ceramics
✍ Zinkle, S. J. ;Haltom, C. P. ;Jenkins, L. C. ;DuBose, C. K. H. πŸ“‚ Article πŸ“… 1991 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 917 KB

## Abstract The general techniques necessary to produce a high‐quality cross‐sectioned ceramic specimen for transmission electron microscope observation are outlined. A particularly important point is that the width of the glued region between faces of the ceramic specimen must be < 0.2 ΞΌm to preve

Automated jet polishing of transmission
Automated jet polishing of transmission electron microscope specimens for in situ straining
✍ Hardiman, B. ;Clark, W. A. T. ;Wagoner, R. H. πŸ“‚ Article πŸ“… 1987 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 310 KB πŸ‘ 1 views

A jet-polishing technique has been developed for use in the preparation of microtensile specimens for HVEM examination. The technique requires the use of a pair of Teflon sheet inserts with rectangular openings in a conventional specimen holder. When inserts with optimum opening dimensions are used,

A method for preparing powdered specimen
A method for preparing powdered specimens for transmission electron microscopy
✍ Carr, Martin J. πŸ“‚ Article πŸ“… 1985 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 399 KB πŸ‘ 1 views

A new method of preparing TEM samples from powders is described. The method consists of compacting epoxy-powder composite mixtures in special molds by centrifuging prior to polymerization. The compact is then ion milled by standard methods. Samples prepared in this way are currently being used to st