A highly efficient class-F power amplifier for wideband linear power amplifier applications
✍ Scribed by Jangheon Kim; Junghwan Moon; Sungchul Hong; Bumman Kim
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 513 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this letter, a highly efficient class‐F power amplifier (PA) is developed as a new main block of the wideband base‐station linear power amplifier. The class‐F PA is implemented using Eudyna EGN010MK GaN HEMT with a 10‐W peak envelop power. The nonlinearity and memory effects of class‐F PA are explored to apply the wideband application. The maximum power‐added efficiency of the implemented PA is 68% at a saturated output power of 40 dBm for the 2.14‐GHz CW signal. The PA delivers a good efficiency of 35% at an average output power of 32.3 dBm for wide‐band code division multiple access 3FA signal with 15‐MHz bandwidth, and the linearity can be improved to about −48 dBc using the digital feedback predistortion linearization technique. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2323–2326, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24631
📜 SIMILAR VOLUMES
## Abstract In this article, we propose the wideband digital predistortion (WDPD) for a highly linear and efficient GaN HEMT Doherty power amplifier (DPA). The WDPD is composed of the memory less DPD and the memory system, which compensates for the memory effects to achieve a highly linear wideband
## Abstract This paper describes a highly efficient class‐E power amplifier. The design has been carried out at 1 GHz using a LDMOS transistor with 10 W of peak envelope power (PEP). Drain efficiency of 76.1%, power‐added efficiency (PAE) of 73.6%, and gain of 14.8 dB are achieved at an output powe
## Abstract The design methodology and measured performance of a broadband UHF class‐F power amplifier is presented and compared to that of a typical narrowband class‐F design. The realized broadband circuit achieves 65% of power‐added efficiency with 21 ± 0.5‐dBm output power from 575 to 915 MHz,
## Abstract This article presents a high‐efficiency GaN HEMT class‐F Doherty amplifier for 2.14‐GHz WCDMA applications. From the measured results, the proposed amplifier shows the PAE and drain efficiency of 56.3 and 60.1% at 39.5 dBm (6‐dB back‐off power from Psat) for a single tone. For a one‐car
Multiharmonic manipulation is presented as the most effective solution to improve power amplifier (PA) efficiency performances. Remarkable improvements in output power, power gain and power-added efficiency (PAE) are demonstrated, properly manipulating the input and output second and third harmonics