## Abstract In this article, a series of compact dual‐band bandpass filters are proposed using the stepped‐impedance stub loaded hexagonal stepped‐impedance resonator. The resonator has three functions in the filter as follow: (1) dual‐resonances operation introduced by the first‐ and second‐resona
A dual-band band-pass filter using stepped impendance resonator
✍ Scribed by Long Guo; Zhi-Yuan Yu; Long Zhang
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 687 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this article, a novel dual‐band band‐pass filter (BPF) using meandering stepped impedance resonators is proposed, since the advantage of their harmonic frequencies behavior, simple structures, and simple‐established design methodology.By selecting proper impedance ration (K) and the length ration (α), a dual‐band frequencies responses can be achieved. Using this structure, a dual‐band BPF performance at 2.4/5.25 GHz is designed. To improve the selectivity, two stubs are introduced into input/output lines to create another three transmission zeros. Both electromagnetic simulation and measurement results are presented. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:123–125, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.25648
📜 SIMILAR VOLUMES
## Abstract An ultra‐narrow band band‐pass filter with Square open loop resonator (SOLR) is reported in this article. The designed OLR cell demonstrates compact size, broad band‐stop and good slow‐wave effect. An ultra‐narrow band band‐pass filter, incorporated with three SOLR cells, is simulated a
## Abstract This article proposes a compact multilayer band‐pass filter based on low‐temperature co‐fired ceramic (LTCC) technology.The filter is constructed using U‐type stepped impedance resonators (SIR) with microstrip input and output ports. To validate the proposed filter, a three‐order X‐band
## Abstract In this article, a compact dual‐mode patch resonator for band‐pass filter applications is developed. The size reduction of the studied filter is simply achieved by etching a dual‐cross slot on the patch. Studies indicate that with this arrangement, the size can be reduced to 26.7% as co
## Abstract In this article, parallel‐coupled microstrip line (PCML) with ground plane aperture is used to improve the stopband performance of a stub tuned dual mode ring resonator band‐pass filter (BPF). The PCML with ground plane structure produces a wide‐band band‐pass response, whereas the stub
## Abstract A new dual‐band bandpass filter (BPF) for 2.4/5.2 GHz WLAN systems using two‐stepped impedance resonators is presented. With new properly coupled structure, this filter appears very compact and easy to be fabricated. Measured results show that this BPF has low insertion loss of 0.3 dB a