## Abstract A novel design of a dual‐mode resonator with double‐ring structure for a band‐pass filter is presented in this paper. Voltage/current couplings between the two rings are proposed based on a mode chart. Because each ring exhibits dual‐mode responses, they determine the range of operation
Design of a compact dual-mode patch resonator band-pass filter
✍ Scribed by Jia-Lin Li; Shi-Wei Qu; Quan Xue
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 384 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this article, a compact dual‐mode patch resonator for band‐pass filter applications is developed. The size reduction of the studied filter is simply achieved by etching a dual‐cross slot on the patch. Studies indicate that with this arrangement, the size can be reduced to 26.7% as compared to the conventional patch resonator. Meanwhile, a pair of transmission zeros close to the pass band improves its selectivity. A demonstrator filter is optimally designed, fabricated and measured. Both measurements and simulations are presented and compared in the article. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 1382–1385, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24329
📜 SIMILAR VOLUMES
## Abstract In this article, parallel‐coupled microstrip line (PCML) with ground plane aperture is used to improve the stopband performance of a stub tuned dual mode ring resonator band‐pass filter (BPF). The PCML with ground plane structure produces a wide‐band band‐pass response, whereas the stub
## Abstract A compact dual‐mode bandpass filter (BPF) using equilateral triangular slotted‐patch resonator is proposed, which has the advantages of compact size, low insertion loss, and good passband selectivity because of two transmission zeros located at the low and high stopband. A demonstration
## Abstract In this article, several square open‐loop resonators with transmission lines are proposed to design the optimized bandpass filters. A compact microstrip filter using an open‐loop resonator was designed, fabricated and measured. At the center frequency f~0~ = 1.80 GHz, a 3‐dB bandwidth o
## Abstract Compact dual‐band bandpass filter using short stub loaded resonators is presented in this letter, the proposed resonator possesses the advantage that its center frequency of the even mode can be flexibly controlled, whereas that of the odd‐mode is fixed. A dual‐band filter using pseudo‐
A compact, band-pass filter utilizing multi-element resonators, structured from sections of distributed transmission lines, is presented. A band-pass filter design procedure is established that emphasizes CAD techniques to characterize the individual resonators and to determine the resonator couplin