✦ LIBER ✦

A continuous hybrid approach to the noise modelling of FETs

✍ Scribed by Tayfun Günel

Publisher: John Wiley and Sons
Year: 2003
Tongue: English
Weight: 123 KB
Volume: 38
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.10970

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

In this work, a continuous hybrid approach (CHA) to determine the FET model elements for given noise parameters in a frequency band is presented. The CHA is based on a continuous parameter genetic algorithm and a controlled random search algorithm. The results obtained from the CHA are compared with the given noise and scattering parameters of the FET. This approach has been simply and effectively applied to the noise modelling of FETs. © 2003 Wiley Periodicals, Inc. Microwave Opt Technol Lett 38: 56–60, 2003

📜 SIMILAR VOLUMES

A continuous hybrid approach to the FET

A continuous hybrid approach to the FET modelling for the maximum transducer power gain

✍ Tayfun Günel 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 127 KB

## Abstract In this work, a continuous hybrid approach (CHA) to the determination of the FET model elements for the maximum transducer power gain in a frequency band is presented. The CHA is based on a continuous parameter genetic algorithm and a controlled random search algorithm. The result obtai

Noise model of a reverse-biased cold-FET

Noise model of a reverse-biased cold-FET applied to the characterization of its ENR

✍ M. C. Maya; A. Lázaro; L. Pradell 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 137 KB

## Abstract This paper presents a broadband‐noise circuit model for a “cold”‐FET (__V__~__ds__~ = 0 V) with a reverse‐biased gate. The noise model includes two intrinsic uncorrelated noise‐current sources whose spectral densities are determined from measurement of the device's __S__ parameters and

A method for the determination of a dist

A method for the determination of a distributed FET noise model based on matched-source noise-figure measurements

✍ M. C. Maya; A. Lázaro; L. Pradell 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 131 KB 👁 1 views

## Abstract A new method for the determination of a distributed FET noise model is presented. It is based on the extraction of the intrinsic noise‐correlation matrix of an elemental section of the device from the device's noise figure, measured for only one source‐impedance state at a number of fre

A hybrid finite element/finite differenc

A hybrid finite element/finite difference time domain electromagnetic approach to the analysis of high-frequency FET devices

✍ A. Monorchio; A. Cidronali; G. Manara; G. Pelosi 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 273 KB 👁 2 views

A comprehensive simulation procedure is presented for describing the behaviour of high-frequency "eld e!ect transistors (FETs). It combines a circuit model of the intrinsic part of the device with a hybrid "nite elements/"nite di!erences (FE/FD) technique directly implemented in time domain (TD). Th

The wave approach to noise modeling of m

The wave approach to noise modeling of microwave transistors by including the correlation effect

✍ Olivera Pronić; Vera Marković; Nataša Maleš-Ilić 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 195 KB 👁 3 views

A practical approach based on a unilater

A practical approach based on a unilateral FET model for the design of a MMIC distributed amplifier

✍ Claudio Paoloni; Stefano D'Agostino 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 252 KB 👁 2 views

Figure 5 Convergence of the corrected diffraction coefficients f/')(w) to the exact pattern p,(w) of E = m as E increases from 2 to 1000 for 0, = 60", 8, = 300", and 0, = 330"