✦ LIBER ✦

A broadband CPW-fed nonuniform folded-slot antenna with a pair of matching slots

✍ Scribed by S. M. Deng; C. W. Chiu; T. M. Lai; T. W. Chen

Publisher: John Wiley and Sons
Year: 2004
Tongue: English
Weight: 217 KB
Volume: 43
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.20403

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

In this paper, we describe a variation of a folded slot antenna that is formed by a nonuniform‐width slot. The antenna is fed by a coplanar waveguide on which a pair of small slits are located on both sides for broadband matching. The simulated results and measured data reveal that it enjoys a relatively wide bandwidth of 37.4%. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 43: 147–148, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20403

📜 SIMILAR VOLUMES

A broadband CPW-fed inductive slot anten

A broadband CPW-fed inductive slot antenna

✍ Xian-Chang Lin; Ling-Teng Wang; Cheng-Liang Lai; Yu-Seng Liu 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 90 KB 👁 1 views

## Abstract In this paper, a broadband coplanar waveguide (CPW)‐fed inductive slot antenna is presented. It consists of a conventional CPW inductive slot antenna and a CPW inductively coupled slot antenna in the feeding network. The experimental results provide the characteristic of excellent enhan

A CPW-fed broadband slot antenna with li

A CPW-fed broadband slot antenna with linear taper

✍ Jun-Wei Niu; Shun-Shi Zhong 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 246 KB 👁 1 views

## Abstract A new coplanar waveguide (CPW)‐fed broadband printed slot antenna is presented. The impedance bandwidth is greatly increased by using a linear taper. The test antenna's impedance bandwidth of −10‐dB return loss reaches 40% with low cross‐polarization level. The impedance characteristics

A novel broadband CPW-fed asymmetrical s

A novel broadband CPW-fed asymmetrical slot antenna

✍ Li Zhang; Yong-Chang Jiao; Kun Song; Fu-Shun Zhang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 333 KB 👁 1 views

## Abstract In this article, a novel CPW‐fed broadband asymmetrical slot antenna is proposed. The prototype consists of an asymmetrical slot and a tuning stub. From experimental results, the measured impedance bandwidth of this antenna, defined by −10 dB return loss, can reach an operating bandwidt

A CPW-fed broadband circularly polarized

A CPW-fed broadband circularly polarized square slot antenna

✍ Qing-Xin Chu; Shu Du 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 332 KB 👁 1 views

## Abstract A new broadband circularly polarized (CP) square slot antenna with coplanar waveguide fed is proposed. Two symmetrical E‐shaped slits embedded in opposite corners of ground plane are designed to obtain an excellent CP bandwidth. Simulated results show that the broadband performance is f

A novel design of a CPW-fed square slot

A novel design of a CPW-fed square slot antenna with broadband circular polarization

✍ Kow-Ming Chang; Ren-Jie Lin; I-Chung Deng; Jin-Bo Chen; Ke Qing Xiang; Chang Jun 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 325 KB 👁 1 views

## Abstract A novel design of a broadband circularly polarized square slot antenna fed by a single coplanar waveguide is proposed and discussed. The circularly polarized radiation is achieved by means of using an outer rectangular ring and an inner rectangular ring at the center of a square slot. T

Slot antenna fed by a CPW line with tape

Slot antenna fed by a CPW line with tapered transition

✍ Guiping Zheng; Ahmed A. Kishk; Allen W. Glisson; Alexander B. Yakovlev 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 91 KB 👁 1 views

## Abstract A tapered coplanar waveguide (CPW) transition is proposed in order to facilitate the connection between a slot antenna and coaxial connector. The broadband bow‐tie slot antenna is considered as an example in this design. The tapered transition is utilized to optimize the connection of t