A CPW-fed broadband circularly polarized square slot antenna
✍ Scribed by Qing-Xin Chu; Shu Du
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 332 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A new broadband circularly polarized (CP) square slot antenna with coplanar waveguide fed is proposed. Two symmetrical E‐shaped slits embedded in opposite corners of ground plane are designed to obtain an excellent CP bandwidth. Simulated results show that the broadband performance is formed by three resonant modes. Some key parameters are studied to analysis the characteristics of the proposed antenna. Measured results show that the 3 dB axial ratio bandwidth is larger than 32.8% relative to the center frequency of 2165 MHz and the impedance bandwidth is as large as 54.8% with voltage standing wave ratio (VSWR) ≤2. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 409–412, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24904
📜 SIMILAR VOLUMES
## Abstract In this article, a new design of a broadband dual circularly polarized square slot antenna loaded with metallic strips is presented. The proposed dual circular polarization (CP) radiations are achieved by loading the square slot with a T‐shaped strip and two microstrip T‐junctions. The
## Abstract A new broadband single‐fed circularly polarized (CP) wide‐slot antenna is presented in the letter. The antenna is composed of a wide‐slot, with a T‐shaped stub and a microstrip T‐junction. The CP operation is realized by the interaction from the T‐shaped stub on the wide‐slot and the T‐
## Abstract A novel design of a broadband circularly polarized square slot antenna fed by a single coplanar waveguide is proposed and discussed. The circularly polarized radiation is achieved by means of using an outer rectangular ring and an inner rectangular ring at the center of a square slot. T
A no¨el bow-tie slot antenna fed by CPW is in¨estigated. ( ) It is designed to work on a thick substrate h s 62 mil with a high ( ) dielectric constant s 10.1 . Two metal stubs are introduced at the r center of the bow-tie slot antenna to control the impedance matching and the cross-polarization le¨
## Abstract In this paper, a broadband coplanar waveguide (CPW)‐fed inductive slot antenna is presented. It consists of a conventional CPW inductive slot antenna and a CPW inductively coupled slot antenna in the feeding network. The experimental results provide the characteristic of excellent enhan