## Abstract A fully integrated noncoherent IR‐UWB CMOS receiver is implemented using 0.18 μm CMOS technology.To remove the bulky and lossy external balun, the receiver contains single to differential circuit embedded in low‐noise amplifier (LNA) stages. The LNA stage also includes a tunable LC load
A 6–10 GHz noncoherent IR-UWB CMOS receiver
✍ Scribed by Mincheol Ha; Jaeyoung Kim; Youngjin Park; Yunseong Eo
- Book ID
- 112145059
- Publisher
- John Wiley and Sons
- Year
- 2012
- Tongue
- English
- Weight
- 865 KB
- Volume
- 54
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract This letter presents the design and measurement of a CMOS impulse‐radio ultra‐wideband (UWB) impulse generator using IBM 90‐nm CMOS technology for the application of 3.1–10.6 GHz UWB systems. The impulse generator has a simplex architecture using digital circuits and passive bandpass fi
## Abstract A 3–6 GHz broadband CMOS single‐ended LNA fabricated with the 0.18 μm 1P6M process for UWB and WLAN receiver is presented. Due to its noncascode circuit architecture, the proposed LNA can operate under 1V supply voltage and 6mA current consumption. In the UWB low band (3.1–5.15 GHz), th
## Abstract A 3–10 GHz broadband CMOS T/R Switch for ultra‐wideband (UWB) transceiver is proposed. This broadband CMOS transmit/receive (T/R) Switch is fabricated based on the 0.18 μm 1P6M standard CMOS process. On‐chip measurement of the CMOS T/R Switch is performed. The insertion loss of the prop
## Abstract A 16‐GHz CMOS differential Colpitts VCO fabricated with the 0.18 μm 1P6M process is presented. The 16‐GHz VCO is a good choice for the local oscillator (LO) circuit of the UWB or 60‐GHz WPAN direct conversion receiver. The VCO is composed of a PMOS transistor‐pair core circuit and two s