๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

A 2.4 GHz Fully Integrated Cascode-Cascade CMOS Doherty Power Amplifier

โœ Scribed by Li-Yuan Yang; Hsin-Shu Chen; Chen, Y.-J.E.


Book ID
118051973
Publisher
IEEE
Year
2008
Tongue
English
Weight
420 KB
Volume
18
Category
Article
ISSN
1531-1309

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


A 2.6-GHz fully integrated CMOS power am
โœ Hwann-Kaeo Chiou; Hsien-Yuan Liao; Chien-Chung Chen; Shih-Ming Wang; Cheng-Chung ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 257 KB

## Abstract A 2.6โ€GHz power amplifier was implemented with a 0.18 ฮผm RF CMOS process. The matching networks were fully integrated without any external components. To increase the output power, the power combining technique was adopted and realized by a 2:1 onโ€chip transformer, which was designed to

Fully integrated 1.9-GHz CMOS power ampl
โœ Changkun Park; Younsuk Kim; Haksun Kim; Songcheol Hong ๐Ÿ“‚ Article ๐Ÿ“… 2006 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 127 KB

cations in the complex wave propagation environment. Similar radiation patterns for other frequencies over the operating band were also seen, and the results are not shown for brevity. Measured peak antenna gain and simulated (Ansoft HFSS) radiation efficiency versus frequency is shown in Figure 4.

A 1.2-V fully integrated 2.4-GHz low-noi
โœ C. C. Meng; M. H. Chiang; T. H. Wu ๐Ÿ“‚ Article ๐Ÿ“… 2002 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 314 KB

## Abstract A 1.2โ€V fully integrated 0.35โ€ฮผm inductively degenerated common source CMOS lowโ€noise amplifier has been demonstrated at 2.4 GHz in this paper. A simple common source configuration can be operated at lower voltage and has lower output impedance when compared with a conventional high out

A 2.4 GHz ultra low power subthreshold C
โœ Lim Kok Meng; Ng Choon Yong; Yeo Kiat Seng; Do Manh Anh ๐Ÿ“‚ Article ๐Ÿ“… 2007 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 121 KB

## Abstract A 2.4 GHz subthreshold CMOS lowโ€noise amplifier (LNA) employing currentโ€reuse technique is presented for the first time. The circuit measuring 1050 ร— 723 ฮผm^2^ is designed using CHRT's 0.18 ฮผm RF CMOS technology. With the pushโ€“pull configuration, the amplifier simulated using Spectreยฎ h