𝔖 Bobbio Scriptorium
✦   LIBER   ✦

ZnO Thin Film, Device, and Circuit Fabrication using Low-Temperature PECVD Processes

✍ Scribed by Jie Sun; Devin A. Mourey; Dalong Zhao; Thomas N. Jackson


Book ID
107455095
Publisher
Springer US
Year
2007
Tongue
English
Weight
454 KB
Volume
37
Category
Article
ISSN
0361-5235

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


ChemInform Abstract: Ferrite Thin Film D
✍ Masanori Abe; Kazuhiro Nishimura; Yoshitaka Kitamoto πŸ“‚ Article πŸ“… 2001 πŸ› John Wiley and Sons βš– 25 KB πŸ‘ 2 views

## Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a β€œFull Text” option. The original article is trackable v

Fabrication of the ZnO thin films using
✍ D.-G. Yoo; S.-H. Nam; M.H. Kim; S.H. Jeong; H.-G. Jee; H.J. Lee; N.-E. Lee; B.Y. πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 850 KB

We deposited ZnO thin films at room temperature by RF magnetron sputtering method with home-made targets, and for application tests using these films as transparent conductive oxide (TCO) anodes, wetchemical etching behaviors of ZnO films were also investigated using various chemicals. In order to f

Preparation of ZnO thin film by the sol-
✍ Ehara, Takashi ;Ueno, Takaaki ;Abe, Junya πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 262 KB

## Abstract Zinc oxide thin films have been prepared by the sol–gel method from a 2‐methoxyethanol solution of zinc acetate dihydrate on SiO~2~ substrates using air, pure oxygen, and 1% ozone in oxygen as oxygen source. In the cases where air or oxygen was used as the oxygen source for thermal anne

Nanocrystalline transparent SnO2-ZnO fil
✍ K. Ravichandran; B. Sakthivel; P. Philominathan πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 272 KB

## Abstract Nanocrystalline and transparent conducting SnO~2~‐ ZnO films were fabricated by employing an inexpensive, simplified spray technique using a perfume atomizer at relatively low substrate temperature (360Β±5 Β°C) compared with conventional spray method. The structural studies reveal that th