𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Tri-band bow-tie antenna with overlapped arms

✍ Scribed by Yanmei Zhang; Gang Wang

Book ID
102950439
Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
947 KB
Volume
52
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

A Tri-band bow-tie antenna with overlapped arms is designed to operate at one of the GPS bands from 1.57042 GHz to 1.58042 GHz and the WLAN bands from 2.4 GHz to 2.5 GHz and 5.15 GHz to 5.83 GHz. The designed bow-tie antenna was fabricated and tested, showing good agreements with the simulation results. A method to generate and adjust the three bands of the antenna is also presented.

πŸ“œ SIMILAR VOLUMES

Bow-tie wide-band monopole antenna with
Bow-tie wide-band monopole antenna with the novel impedance-matching technique
✍ Jong-Pil Lee; Seong-Ook Park; Sang-Keun Lee πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 979 KB

## Abstract A staircase bow‐tie monopole‐type antenna that features a novel broadband technique is investigated experimentally and numerically. A bandwidth of 77.1% (VSWR ≀ 2) can be achieved, and an omnidirectional radiation pattern is obtained. The electrical characteristics of the proposed anten

Wideband bow-tie antenna with coplanar s
Wideband bow-tie antenna with coplanar stripline feed
✍ G. Bindu; V. Hamsakkutty; Anil Lonappan; Joe Jacob; Vinu Thomas; C. K. Aanandan; πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 111 KB

## Abstract The experimental investigation on a coplanar stripline‐fed bow‐tie antenna backed by an image plane is presented. Analysis of the radiation characteristics shows that the antenna exhibits an enhanced 2:1 SWR bandwidth of 46%, low cross polarization, and reduced back radiation. This ante

Development of bow-tie antenna with an o
Development of bow-tie antenna with an orthogonal feed
✍ P. T. Teo; K. S. Lee; Y. B. Gan; C. K. Lee πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 260 KB

## Abstract A bow‐tie element with an orthogonal feed arrangement has been developed to conform to the shape of a handheld device. An improved method to feed the bow‐tie antenna was realised, which includes modification to the printed Roberts balun with stubs to provide an exact feed location and b