𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The safety of ceramic balls on metal stems in hip arthroplasty

✍ Scribed by Prof. Günther Heimke

Publisher
John Wiley and Sons
Year
1994
Tongue
English
Weight
658 KB
Volume
6
Category
Article
ISSN
0935-9648

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Ceramic-on-ceramic vs. metal-on-metal in
Ceramic-on-ceramic vs. metal-on-metal in total hip arthroplasty (THA): do 36-mm diameters exhibit comparable wear performance?
✍ M. Spinelli; S. Affatato; A. Corvi; M. Viceconti 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 143 KB

## Abstract Hard‐on‐hard hip implants were thought as a solution to wear problems affecting polyethylene. Alumina ceramic and metal articulations are harder, biocompatible, and result in reduced wear and particles to the surrounding tissue. Alumina ceramic hip implants produce lower wear rates than

Spectral characterization of squeaking i
Spectral characterization of squeaking in ceramic-on-ceramic total hip arthroplasty: Comparison of in vitro and in vivo values
✍ Elhadi Sariali; Zhongmin Jin; Todd Stewart; John Fisher 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 298 KB

## Abstract Squeaking is a cause for concern in total hip arthroplasty (THA). However, the definition of this sound remains vague. Our goals were to characterize spectrally the squeaking in vitro under lubricated conditions and to compare the in vitro frequencies to in vivo frequencies. Four patien

Wear analysis of retrieved ceramic-on-ce
Wear analysis of retrieved ceramic-on-ceramic articulations in total hip arthroplasty: Femoral head makes contact with the rim of the socket outside of the bearing surface
✍ Tetsuya Yamamoto; Masanobu Saito; Masaru Ueno; Takehito Hananouchi; Yusuke Tokug 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 310 KB

## Abstract We investigated articular bearing surfaces retrieved from three patients with ceramic‐on‐ceramic total hip arthroplasties using high‐quality alumina. The duration of implantation was 3.5, 3.0, and 2.5 years, respectively. Dislocation of the hip joint after implantation did not occur in

Metal-on-metal bearings in total hip art
Metal-on-metal bearings in total hip arthroplasties: Influence of cobalt and chromium ions on bacterial growth and biofilm formation
✍ Anton H. Hosman; Henny C. van der Mei; Sjoerd K. Bulstra; Henk J. Busscher; Dani 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 211 KB 👁 1 views

## Abstract Metal‐on‐metal (MOM) bearings involving cobalt–chromium (Co–Cr) alloys in total hip arthroplasties are becoming more and more popular due to their low wear. Consequences of corrosion products of Co–Cr alloys are for the most part unclear, and the influence of cobalt and chromium ions on

The wear of a polyethylene socket articu
The wear of a polyethylene socket articulating with a zirconia ceramic femoral head in canine total hip arthroplasty
✍ Hamada, Yoshiki ;Horiuchi, Tadahiro ;Sano, Yayoi ;Usui, Ikuo 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 515 KB

Wear of yttria-zirconia (zirconia) in the femoral head was investigated in mature mongrel dogs weighing 10 to 13 kg. Two dogs, which were used as a control group, were sacrificed 18 months after implantation of the uncemented modular hip system with an alumina ceramic (alumina) femoral head. A zirco