Palladium was determined in pharmaceuticals by direct graphite furnace atomic absorption spectrometry (GFAAS) method. The detection limit was 0.1 mg/g in 5% solution; the recovery of 0.5-2.0 mg/g Pd spike was close to 100%. The flow injection GFAAS method was worked out using oxime and iminodiacetic
The effect of acids on the determination of thallium by atomic absorption spectrometry with a graphite furnace
β Scribed by C.W. Fuller
- Publisher
- Elsevier Science
- Year
- 1976
- Tongue
- English
- Weight
- 224 KB
- Volume
- 81
- Category
- Article
- ISSN
- 0003-2670
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Ruthenium shows promise for use as a chemical modifier for the determination of ultratrace quantities of lead in solution when compared with the popular and widely used palladium. There is experimental evidence that ruthenium reacts with lead in the graphite tube to form the intermetallic compound P
The optimized measurement of Cr in urine samples using graphite furnace atomic absorption spectrometry, with a tungsten lamp and Zeeman-effect background correction is described. Sample dilution and slow hot injection were studied in an effort to improve the precision. Parameters such as detection l
A graphite furnace atomic absorption spectrometry method was used to determine the chromium content of selected foods following a modified dry ashing sample preparation procedure. Platform atomization is used and quantitation is accomplished using peak area measurements. Both direct calibration agai
Optimum operating conditions have been determined for the atomization of zinc from metalloproteins in a graphite furnace. Addition of 50 mM ammonium dihydrogen phosphate to the protein and measurement of the integrated absorbance suppresses or eliminates matrix interference effects. Using a 5-~1 sam