Ruthenium, a Potential Chemical Modifier for the Determination of Lead by Graphite Furnace Atomic Absorption Spectrometry
β Scribed by Kangmei Cai; Curtis W. McDonald
- Publisher
- Elsevier Science
- Year
- 1997
- Tongue
- English
- Weight
- 97 KB
- Volume
- 57
- Category
- Article
- ISSN
- 0026-265X
No coin nor oath required. For personal study only.
β¦ Synopsis
Ruthenium shows promise for use as a chemical modifier for the determination of ultratrace quantities of lead in solution when compared with the popular and widely used palladium. There is experimental evidence that ruthenium reacts with lead in the graphite tube to form the intermetallic compound PbRu 2 . The amount of ruthenium had a dramatic effect on the absorbance profile for the lead signal.
π SIMILAR VOLUMES
A method for the indirect determination of argmme by graphite furnace atomic absorption spectrometry after preconcentratlon on a Nafion chemically modified tungsten cod IS descllbed The mechanism IS discussed In HCl solution (pH 3 51, the exchange competltlon between protonated argmme and Cu2+ on th
A unique impaction graphite furnace atomic absorption spectrometric system was used to investigate the concentration of lead in smoke from burning crude oil. The lead concentration in 3 ml of crude oil decreased sharply in the inital burning stages, which was attributed to the release of the more vo
A chemical modifier composed of nickel and zirconium salts and treatment of the graphite tube with zirconium solution were studied for the determination of boron in cast iron, Fe-, Ni-and Fe-Ni-based alloys. A combination of 3000 mg 1-l nickel and 1000 mg I-' zirconium as chemical modifier and soaki
A graphite furnace atomic absorption spectrometry method was used to determine the chromium content of selected foods following a modified dry ashing sample preparation procedure. Platform atomization is used and quantitation is accomplished using peak area measurements. Both direct calibration agai
The separation and concentration methods for the trimethylselenonium ion (TMSe) in urine samples were developed utilizing the formation of the ion pair of TMSe with tetrakis(4fluorophenyl)borate. The ion pair could be quantitatively collected by a solvent extraction technique as well as a cellulose