## Abstract This paper concerns the problem of modelling CoolSET voltage regulators with self‐heating taken into account. The limits of the model of this class of regulators developed by Infineon Technologies AG were analysed. A new electrothermal model of CoolSET regulators designed to analyse tra
The compact d.c. electrothermal model of power MOSFETs for SPICE
✍ Scribed by Janusz Zarębski
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 294 KB
- Volume
- 23
- Category
- Article
- ISSN
- 0894-3370
- DOI
- 10.1002/jnm.728
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This paper concerns the problem of modelling of power MOS transistors in SPICE. In the paper the new form of the electrothermal d.c. model (ETM) of the considered class of power devices is proposed. The ETM is based on the modified Shichman–Hodges model, in which the generation current, the breakdown voltage, the sub‐threshold region, the thermally dependent series resistances and self‐heating are included. The device inner temperature calculated from the thermal model is the sum of the ambient temperature and the product of the electrical power dissipated inside the device and its thermal resistance. The presented model has been verified experimentally. The results of calculations and measurements of MTD15N06V (ON Semiconductor) and IRF840 (International Rectifier) transistors are given as well. Copyright © 2009 John Wiley & Sons, Ltd.
📜 SIMILAR VOLUMES
## Abstract This paper concerns the problems of the parameter values estimation of d.c. electrothermal model of the BJT formulated for circuit analysis with SPICE. In this case, PARTS software available in SPICE cannot be used. In the paper, a new estimation algorithm for d.c. electrothermal model
## Abstract Simultaneous switch noise, or power/ground bounce noise, on the power and ground planes of high‐speed circuit packages is one of the main concerns of signal integrity or power integrity issues. A novel time‐domain approach is proposed to synthesize the broadband models of the resonance
tenna array, it not only can have more power gain, but also effectively suppress the reflected signal without using longer lines or substrate material of larger height. Hence, the system can distinguish the true main beam correctly.