✦ LIBER ✦

The baseline construction and its influence on the measurement of heat with differential scanning calorimeters

✍ Scribed by W. F. Hemminger; S. M. Sarge

Publisher: Springer Netherlands
Year: 1991
Tongue: English
Weight: 922 KB
Volume: 37
Category: Article
ISSN: 0022-5215
DOI: 10.1007/bf01913481

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The influence of moisture content and te

The influence of moisture content and temperature on the specific heat of potato measured by differential scanning calorimetry

✍ N. Wang; J.G. Brennan 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 475 KB

On the complex influence of the experime

On the complex influence of the experimental parameters and the properties of the substances on the representation of solid-liquid transitions studied with a differential scanning calorimeter

✍ H. Utschick; B. Gobrecht; C. Fleischhauer; A. Treffurth; H. Müller 📂 Article 📅 1988 🏛 Springer Netherlands 🌐 English ⚖ 328 KB

Gelatinization Profiles of Peruvian Carr

Gelatinization Profiles of Peruvian Carrot, Cocoyam and Potato Starches as Measured with the Brabender Viscoamylograph, Rapid Visco-Analyzer, and Differential Scanning Calorimeter

✍ Elevina E. Péret; William M. Breene; Yousria A. Bahnassey 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 32 KB 👁 1 views

Theoretical investigations of the heat t

Theoretical investigations of the heat transfer at quantitative DSC-measurements and its influence on the determination of the thermal and calorimetric

✍ W. Poeßnecker 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 512 KB

The effect of high pressure processing o

The effect of high pressure processing on the morphology of polyethylene films tested by differential scanning calorimetry and X-ray diffraction and its influence on the permeability of the polymer

✍ Seungran Yoo; Jaesung Lee; Christopher Holloman; Melvin A. Pascall 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 172 KB 👁 2 views

## Abstract This study investigated the influence of high‐pressure processing on the morphology and permeability of low‐density polyethylene (LDPE) films used for food packaging. This was done by monitoring the crystallinity, melting temperature (__T__~__m__~), and oxygen transmission rate (OTR) of

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB