𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Tensile properties of poly(ethylene terephthalate) and polyethylene in-situ microfiber reinforced composite formed via slit die extrusion and hot-stretching

✍ Scribed by Zhong-Ming Li; Ming-Bo Yang; Ai Lu; Jian-Min Feng; Rui Huang

Book ID
117356927
Publisher
Elsevier Science
Year
2002
Tongue
English
Weight
325 KB
Volume
56
Category
Article
ISSN
0167-577X

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Morphology and Tensile Strength Predicti
Morphology and Tensile Strength Prediction of in situ Microfibrillar Poly(ethylene terephthalate)/Polyethylene Blends Fabricated via Slit-Die Extrusion-Hot Stretching-Quenching
✍ Zhong-Ming Li; Wei Yang; Bang-Hu Xie; Kai-Zhi Shen; Rui Huang; Ming-Bo Yang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 260 KB

## Abstract **Summary:** In situ microfibrillar poly(ethylene terephthalate) (PET)/polyethylene blends (MRB) were successfully fabricated by slit‐die extrusion‐hot stretching‐quenching. The morphology of this new material is mainly influenced by the composition and the hot stretching. Appropriate P

Formation of in situ CB/PET Microfibers
Formation of in situ CB/PET Microfibers in CB/PET/PE Composites by Slit Die Extrusion and Hot Stretching
✍ Xiang-Bin Xu; Zhong-Ming Li; Run-Ze Yu; Ai Lu; Ming-Bo Yang; Rui Huang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 529 KB

## Abstract **Summary:** In this present study, the in situ fabrication of a microfibrillar composite based on poly(ethylene terephthalate) (PET), polyethylene (PE), and carbon black (CB) is attempted. PET and CB were first melt mixed. The CB/PET compound and PE were subsequently melt extruded thro

Transcrystalline Morphology of an in sit
Transcrystalline Morphology of an in situ Microfibrillar Poly(ethylene terephthalate)/Poly(propylene) Blend Fabricated through a Slit Extrusion Hot Stretching-Quenching Process
✍ Zhong-Ming Li; Liang-Bin Li; Kai-Zhi Shen; Wei Yang; Rui Huang; Ming-Bo Yang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 405 KB

## Abstract **Summary:** Isotactic poly(propylene) (iPP) transcrystallites are obtained in in situ microfibrillar polyethylene terephthalate (PET)/iPP blends during a slit extrusion‐hot stretching‐quenching process. Based on morphological information from X‐ray scattering and microscopy, three nucl