Formation of in situ CB/PET Microfibers in CB/PET/PE Composites by Slit Die Extrusion and Hot Stretching

✍ Scribed by Xiang-Bin Xu; Zhong-Ming Li; Run-Ze Yu; Ai Lu; Ming-Bo Yang; Rui Huang

• Book ID: 102938999
• Publisher: John Wiley and Sons
• Year: 2004
• Tongue: English
• Weight: 529 KB
• Volume: 289
• Category: Article
• ISSN: 1438-7492
• DOI: 10.1002/mame.200400016

✦ Synopsis

Abstract

Summary: In this present study, the in situ fabrication of a microfibrillar composite based on poly(ethylene terephthalate) (PET), polyethylene (PE), and carbon black (CB) is attempted. PET and CB were first melt mixed. The CB/PET compound and PE were subsequently melt extruded through a slit die and then hot stretched. The morphological observation of the as‐stretched extrudate indicated that well‐defined microfibers of CB/PET compound could be generated at appropriate CB contents and a fixed hot stretch ratio. In addition, CB was always selectively located in PET. The microfibrillar CB/PET/PE composite has the potential to be a new electrically conductive polymer composite.

Morphology of the carbon black/poly(ethylene terephthalate)/polyethylene (PE) composite after additional mixing in the mixer at the processing temperature of PE.

magnified imageMorphology of the carbon black/poly(ethylene terephthalate)/polyethylene (PE) composite after additional mixing in the mixer at the processing temperature of PE.